SGC22300_01_GF_22FDSOI is a Real Time Clock (RTC) based on the leading SGC21510 solution. Using advanced analog design techniques, to guarantee ultra-low power and ultra-low leakage, it was designed to be the brain of the Power Management Unit (PMU). Controlling the state of each regulator of the PMU, it defines if the regulators are in high, low, ultra-low or adaptive ultra-low power mode. Additionally, it includes anti-temper mechanisms, wake, reset or shutdown causes, that can be masked, allowing also to configure the effect of a reset. Being specified from TJ = −40°C to 125°C, it also includes ultra-low leakage configuration registers to allow the system architect to save the status bits.
RTC AND PMU CONTROLLER
Overview
Key Features
- Nano power Real Time Clock (RTC) with 32kHz oscillator
- PMU control: individual regulators enable / disable
- control in high / low / ultra-low / adaptive ultra-low power
- Ultra-low power adaptive mode (Ludicrous)
- Configurable supply domains isolation support
- Configurable reset and shutdown causes
- Anti-temper mechanisms
- Different wake sources
- 48-bit time counter, 32-bit general-purpose register
- and 2 alarms
- Ultra-low leakage design
- Fast start-up time
Technical Specifications
Related IPs
- Single, Dual and Quad SPI Flash Controller with Boot and Execute On-The-Fly Features
- Flash Memory Controller IP, Support page sizes of 512, 2K, 4K, 8K and 16K bytes NAND Flash memory, 74bit ECC correction (512 or 1K bytes sectors), Soft IP
- General Purpose PMU - Thermal shutdown and overvoltage protected - SilTerra 0.18 um
- xSPI, HyperBus™, and Xccela™ Serial Memory Controller
- UCIe-S PHY and Controller
- Host controller IP for controlling flash and other devices on the SPI bus: Quad SPI, Octal SPI, and xSPI