MIPI D-PHY Tx IP, Silicon Proven in GF 55LP

Overview

The D-PHY specification, version 1.2, is completely complied with by the MIPI D-PHY Analog TX IP Core. The Display Serial Interface and the MIPI Camera Serial Interface (CSI-2) are both compatible with it (DSI protocols). One clock lane and four data lanes make up this TX PHY. An analogue front end produces and receives electrical level signals, while a digital back end controls the I/O operations. automatic calibration for an inbuilt termination resistor A MIPI DSI PHY (MIPI TX DPHY), the D-PHY consists of a PLL, a Clock Lane, four Data Lanes, and a clock lane in addition to a D-PHY that may be used as a GPIO bank with a 5V tolerance

Key Features

  • Compliant to MIPI Alliance Standard for D-PHY specification Version 1.2
  • Supports standard PPI interface compliant to MIPI Specification
  • Supports synchronous transfer at high-speed mode with a bit rate of 80-2500 Mb/s
  • Supports asynchronous transfer at low power mode with a bit rate of 10 Mb/s
  • Supports ultra-low power mode, high-speed mode and escape mode
  • Supports one clock lane and up to four data lanes
  • Data lanes support transfer of data in high-speed mode
  • Supports error detection mechanism for sequence errors and contentions
  • Supports contention detection
  • Configurable skew option for each Clock and Data lanes
  • Testability for TX, RX and PLL
  • Silicon Proven in GF 55LPe.

Block Diagram

MIPI D-PHY Tx IP, Silicon Proven in GF 55LP  Block Diagram

Deliverables

  • GDSII & layer map
  • Place-Route views (.LEF)
  • Liberty library (.lib)
  • Verilog behaviour model
  • Netlist & SDF timing
  • Layout guidelines, application notes
  • LVS/DRC verification reports

Technical Specifications

Maturity
In Production
Availability
Immediate
×
Semiconductor IP