The MXL-DPHY-CSI-2-TX is a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI Alliance Standard for D-PHY. The IP is configured as a MIPI master optimized for camera interface applications (CSI-2).
The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for High-Speed data traffic while low power functions are mostly used for control.
MIPI D-PHY CSI-2 TX (Transmitter) in TSMC 28HPC+
Overview
Key Features
- Consists of 1 Clock lane and up to 4 Data lanes
- Supports MIPI Standard 1.1 for D-PHY
- Supports both high speed and low-power modes
- 80 Mbps to 1.5Gbps data rate in high speed mode
- 10 Mbps data rate in low-power mode
- High Speed Serializers included
- Low power dissipation
Benefits
- Area and performance optimized for CSI-2 TX applications in production in 28HPC+.
Block Diagram
Video
Mixel Customer Demo - GEO GW5 Warpcam
We demonstrate our customer demo, GEO GW5 Warpcam, featuring Mixel's MIPI D-PHY TX and RX IP.
Applications
- Mobile
- Cameras/Sensors
- IoT
- VR/AR/MR
- Consumer electronics
- Automotive
Deliverables
- Specifications
- GDSII
- LVS netlist
- LEF file
- IBIS Model
- Verilog Model
- Timing Model
- Integration Guidelines
- RTL
- Documentation
- One year support
Technical Specifications
Foundry, Node
TSMC, 28HPC+
Maturity
Silicon Proven
Availability
Now
TSMC
Pre-Silicon:
28nm
HPCP
Related IPs
- MIPI D-PHY/LVDS Combo CSI-2 RX (Receiver) in TSMC 28HPC+
- MIPI D-PHY CSI-2 TX (Transmitter) in TSMC 28HPC+
- MIPI D-PHY in ON Semiconductor 180nm
- MIPI CSI-2 controller Receiver v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- MIPI D-PHY Universal Tx / Rx v1.1 @1.5ghz Ultra Low Power for IoT & Wearables
- MIPI D-PHY Tx v1.1 ONLY @1.5ghz Ultra Low Power & Low Area for IoT & Wearables