Ethernet - up to 800G Verification IP

Overview

The 10/100/1G/2.5G/5G/10G/40G/100G/200G/400G/800G Ethernet Verification IP is compliant with IEEE 802.3 specifications and verifies MAC-to-PHY and PHY-to-MAC layer interfaces of designs with a 10/100/1G/2.5G/5G/10G/25G/40G/50G/100G/200G/400G/800G Ethernet interface. It can work with SystemVerilog,Vera, SystemC, E and Verilog HDL environment. Ethernet Verification IP is developed by experts in Ethernet, who have developed ethernet products in companies like Intel, Cortina-Systems, Emulex, Cisco. We know what it takes to verify a ethernet product.

Ethernet - up to 800G Verification IP is supported natively in SystemVerilog, VMM, RVM, AVM, OVM, UVM, Verilog, SystemC, VERA, Specman E and non-standard verification env

Ethernet - up to 800G Verification IP comes with optional Smart Visual Protocol Debugger (Smart ViPDebug), which is GUI based debugger to speed up debugging.

Key Features

Supports 2.5G and 5G Speeds as per 802.3cb
- 2.5GBASE-KX
- 5GBASE-KR
- 2.5GBASE-T
- 5GBASE-T
Supports 200G and 400G Speeds as per 802.3bs
- 200GBase_KR8
- 200GBase_KR4
- 200GBase_KR2
- 400GBase_KR4
- 400GBase_KR8
- 400GBase_KR16
- Supports CDAUI_16
- Supports CDMII
- Supports FEC
- Supports scrambler
- Supports backplane auto-negotiation
Supports 800G Speeds as per 802.3bs
- 800GBase_KR16
- Supports 800GMII
- Supports Reed - Solomon FEC
- Supports scrambler
- Supports backplane auto-negotiation
Supports 100G as per 802.3ba and 802.3bj
- Supports CGMII
- Supports 100GBase-KR10/100GBase-CR10/100GBase-SR10
- Supports 100GBase-ER4/100GBase-LR4
- Supports 100GBase-KR4
- Supports 100GBase-KR2
- Supports 100GBase-KR
- Supports 100GBase-R
- Supports 100GBASE-KP4 with PMA enable.
- Supports Gray coding and Precoding as per Spec IEEE 802.3
- Supports CAUI_4
- Supports RS_FEC(clause 91)
- Supports scrambler
- Supports backplane auto-negotiation
Supports 40G as per 802.3ba
- Supports XLGMII
- Supports 40GBase-KR4/40GBase-CR4/40GBase-SR4/40GBase-LR4
- Supports FEC
- Supports scrambler
- Supports backplane auto-negotiation
Supports 25G and 50G Speeds
- 25GBase_R
- 25GBase_KR
- 50GBase_KR
- 50GBase_KR2
- Supports FEC
- Supports scrambler
- Supports backplane auto-negotiation
Supports 10G as per 802.3
- Supports XGMII
- Supports XTBI (i.e Output of 8b/10b PCS)
- SUpports XAUI, RXAUI and 10GBASE-KX4
- Supports 10GBASE-KR with scrambler
- Supports FEC for 10GBase-KR
- Supports USXGMII
- Supports scrambler
- Supports backplane auto-negotiation for 10GBase-KX4 and 10GBase-KR
Supports 1G
- Supports GMII
- Supports TBI (i.e Output of 8b/10b PCS)
- Supports SGMII/SGMII_TBI as per specification 1.8
- Supports QSGMII as per specification 1.2
- Supports USGMII as per specification 3.0 and 3.1(5G and 10G)
- Supports RGMII/RTBI as per specification 2.0
- Supports 1000Base-KX
- Supports 1GBASE-SX and 1GBASE-LX
- Supports clause 73 backplane auto-negotiation for 1000Base-KX
- Supports clause 37 auto-negotiation
- Supports SGMII auto-negotiation
- Supports QSGMII auto-negotiation
- Supports USGMII auto-negotiation and packets
- Supports full duplex and half duplex of operation
Supports 100M
- Supports MII
- Supports SMII as per specification 2.1
- Supports RMII as per specification 1.2
- Supports 100BASE-FX
Full support for IEEE 1588-2002 and IEEE 1588-2008
Full support for IEEE 802.3BG
Full support for IEEE 802.1AZ (Energy Efficient Ethernet)
Supports the following TSN protocols:
- Full support for IEEE 802.1BA
- Full support for IEEE 802.1Qat
- Full support for IEEE 802.1Qav
- Full support for IEEE 802.1Q
- Full support for IEEE 802.1AS
- Full support for IEEE 802.1Qbv
- Full support for IEEE 802.1Qbu
- Full support for IEEE 802.1Qca
- Full support for IEEE 802.1CB
- Full support for IEEE 802.1Qcc
- Full support for IEEE 802.1Qci
- Full support for IEEE 802.1Qch
- Full support for IEEE 802.1CM
- Full support for IEEE 802.1Qcr
- Full support for IEEE 802.1CS
- Full support for IEEE 802.3br
Supports G.999.1 interface
Ethernet Verification IP comes with complete UNH Test suite
Supports the following upper layer protocols
- IPV4
- IPV6
- TCP
- UDP
- ICMP
- ARP
- GRE
- NVGRE
- VXLAN
- PPPOE
- EAPoL
- FCOE
- RARP
- IPsec
- MACSEC
- Wake on LAN
- Slow protocol
Supports RoCE
Supports IP in IP
Supports Q in Q
Supports USXGMII
- Supports single port USXGMII as per specification 2.5
- Supports multi port USXGMII as per specification 2.2
Forty Bit Interface (XFBI)
XSBI Interface (16-bit)
XSBI Interface (20-bit)
XLSBI Interface(16X4 40 PCS Interface)
XLSBI Interface(20X4 40 PCS Interface)
CSBI(20 lane) Interface (8,10,16,20,32,64,80,128 bit)
CSBI(10 lane) Interface (8,10,16,20,32,64,80,128 bit)
CSBI(10 lane) Interface (8,10,16,20,32,64,80,128 bit)
PCS to Serdes interface supports all widths
Supports CDR for serial protocols
Supports WAN Interface Sublayer (WIS), type 10GBASE-W
Supports MDIO slave and master model as per Clause 22 and Clause 45
Glitch insertion and detection
Supports all types of TX and RX errors insertion/detection at each layer.
Comes with Tx BFM, Rx BFM, and Monitor
Monitor supports detection of all protocol violations
Supports Pause frame generation and detection
Built in coverage analysis
Callbacks in master and slave for various events
Status counters for various events in bus
Functional safety features (B: No certification, with safety features, in line with the development process)

Benefits

Faster testbench development and more complete verification of Ethernet designs
Easy to use command interface simplifies testbench control and configuration of TX and RX
Simplifies results analysis
Runs in every major simulation environment

Block Diagram

Deliverables

Complete regression suite (UNH) containing all the Ethernet testcases.
Examples showing how to connect various components, and usage of TXRX BFM and Monitor.
Detailed documentation of all class, task and function's used in verification env.
Documentation also contains User's Guide and Release notes.

Technical Specifications

Request Info