Enhanced UART with FIFOs and Synchronous CPU I/F
Overview
The Mentor Graphics M16550S core provides a fully programmable UART that is functionally compatible with the NS 16550AF device. Like the NS 16550AF, the M16550S supports transmission in word lengths of from five to eight bits, together with an optional parity bit and 1, 1½, or 2 stop bits. It also includes two 16-byte FIFOs -one for transmit and one for receive, a 16-bit programmable baud rate generator, an 8-bit scratch register and two DMA handshake lines, which may be configured either to support single-byte transfers (DMA Mode 0) or multiple-byte transfers (DMA Mode 1). Unlike the NS 16550AF, the M16550S offers a synchronous CPU interface. This interface is compatible with the Peripheral Virtual Component Interface (PVCI) defined by VSIA and so allows the core to be readily interfaced to a range of popular on-chip buses such as the AMBA bus and the buses associated with the IBM CoreConnect™ architecture.
Key Features
- Software compatible with the NS 16550AF device
- Programmable word length, stop bits and parity
- Programmable baud rate generator
- PVCI *-compatible CPU interface
- Interrupt generator
- Diagnostic loop-back mode
- Scratch register
- Two 16-byte FIFOs
- Fully synthesizable
- Scan test ready
Deliverables
- Verilog source code
- VHDL source code
- Synthesis script for Design Compiler
- Verilog & VHDL testbenches
- Reference technology netlist
- Product Specification & User Guide
Technical Specifications
Related IPs
- UART with FIFOs, IrDA, and Synchronous CPU Interface Core
- Enhanced UART with FIFOs & IrDA Support
- ARC EM11D Enhanced 32-bit processor core, ARCv2DSP ISA with Cache and XY Memory
- ARC EM9D 32-bit DSP Enhanced Processor core based on the ARCv2DSP ISA with CCM and XY Memory
- Synchronous UART
- UART with FIFOs