4MHz Low Power Oscillator - Low power (4.6µW), Internal Current Reference TowerJazz 0.18 um
Overview
This macro-cell is a general purpose, low power, 4MHz internal oscillator core designed for TowerJazz TS18SL 0.18µm CMOS technology. Two other oscillator outputs are available: 2MHz and 500kHz. A 4-bit digital bus allows frequency calibration against process variations. It includes a start-up circuit and an internal 17nA current bias that is also available in two output pins (200nA) after mirroring. Alternatively, an external 135nA current bias can be used. The core is ideal for applications where power consumption is critical.
Key Features
- Supply voltage from 1V to 2V
- Frequency calibrated against process variations through 4-bit trimming
- Accuracy within ±5%
- 2MHz and 500kHz outputs also available
- Low current (2.5µA@1.8V)
- Enable control
- Indicative area = 0.012mm2
Applications
- Energy harvesting ICs
- Housekeeping applications
- Battery powered equipment
- General purpose measurements
Deliverables
- Datasheet/Integration Guide
- HDL Model
- Flat GDSII database/LVS netlist
- Customer Support
Technical Specifications
Foundry, Node
TowerJazz 0.18 um
Maturity
Silicon Proven
Tower
Pre-Silicon:
180nm
,
180nm
,
180nm
Related IPs
- Low Power 12bit 640Msps silicon proven High performance Current Steering DAC IP Core
- High Performance / Low Power Microcontroller Core
- Ultra low power C-programmable DSP core
- Highest code density, Low Power 32-bit Processor with optional DSP
- Ultra low power, high-performance DSP / controller RISC core
- Ultra low power C-programmable Baseband Signal Processor core