Multi-channel, multi-rate Ethernet aggregator - 10G to 800G ZX (e.g., Telecom)

Overview

The OmegaCORE 800G_ZX is a multi-channel, multi-rate Ethernet aggregator that supports tributaries from 10GE to 800GE, utilizing the 112Gbps SerDes and 56Gbps SerDes.

The supported Ethernet protocols are 10G, 25G, 40G, 50G, 100G, 200G, 400G, 800G and 10GFC, 16GFC, 32GFC, 64GFC, 128GFC, 256GFC, as well as FEC framing of FlexO-1/2/4-SR. It supports any legal combination of Ethernet/Fiberchannel /FlexO rate up to 800G. This core supports up to a maximum of 8 Ethernet channel and works most efficiently with the latest 112Gbps SerDes. With a core clock frequency of 1.6GHz at 7nm or 5nm, this core delivers smallest footprint among the similar solutions in the Ethernet/Fiberchannel/FlexO SOC market.

Key Features

800GE BASE-R PCS Core Features
- PCS layer formed by bonded 2x 400GE PCS in PCS Layer
- Using 32 virtual logical lanes based on 2 x 400GE PCS to reduce power in 800G operation
- Well designed into using 112G/s Serdes to provide highest port density for 800G Ethernet solution.
Specification
400G/200G/100G/50G/40G/25G/10G BASE-R PCS Core Features
- PCS TX Core
  - 256/257B transcoding (to reduce overhead for FEC insertion) (not applicable for 10GE)
  - X58 Scrambling (optional bypass) (not applicable for 10GE)
  - 64B/66B encoding of incoming MII signal
  - Idle block removal (to reduce overhead for AM insertion)
  - Alignment Marker (AM) insertion. Unique marker portion of AM for each lane is s/w configurable.
  - Test pattern generation (scrambled idles)
  - Clause 45 MDIO register set
  - Error detection and interrupt reporting
- Specific KP4 FEC Feature for 800GBASE-R/400GBASE-KP4/200GBASE-KP4/100GBASE-KP/50GBASE-KP
  - KP4 (RS544,514) Forward Error Correction (FEC) parity calculation and with symbol distribution
- Specific KR4 FEC Feature for 100GBASE-KR4/CR4, 50GBASE-KR2 and 25GBASE-KR
  - KR4 (RS528,514) Forward Error Correction (FEC) parity calculation and insertion with symbol distribution
- Specific FC FEC Feature for 50GBASE-R4, 40GBASE-R, 25GBASE-R and 10GBASE-R
  - RS (2112,2080) Forward Error Correction (FEC) parity calculation and insertion
- PCS RX Core
  - 64B/66B decoding to MII signal
  - Reverse 256/257B transcoding (not applicable to 10GE)
  - X58 De-scrambling (optional bypass) (not applicable for 10GE)
  - Alignment marker removal (where applicable)
  - Unique marker portion of AM for each lane is s/w configurable (where applicable)
  - Test pattern monitoring
  - Clause 45 MDIO register set
  - Error detection and interrupt reporting
  - Loopback from TX MII to RX MII
  - Performance Monitoring and Statistics
    - Dynamic skew measurement for each lane
    - PCS Status – link up/down
    - High bit error rate (hi-BER)
    - BER counter
    - Test pattern error counter
    - Multi-lane AM status (locked and aligned/not locked and aligned)
    - FEC Corrected code word count (with FEC enabled)
    - FEC corrected 1s and 0s counts
    - FEC symbol error histogram for KP, KR FEC, and FC FEC
    - FEC Uncorrected code word counts
    - FEC symbol error counters
    - FEC degrade SER
    - FEC Hi-SER alarm
  - Specific KP4 FEC Feature for 800GBASE-R/400GBASE-KP4/200GBASE-KP4/100GBASE-KP/50GBASE-KP
    - Alignment lock and lane deskew
    - Lane reordering
    - KP4 (RS544,514) FEC decoding and error correction
  - Specific KR4 FEC Feature for 100GBASE-KR4/CR4, 50GBASE-KR2 and 25GBASE-KR
    - Alignment lock and lane deskew
    - KR4 (RS528,514) FEC decoding and correction
  - Specific FC FEC Feature for 50GBASE-R4, 40GBASE-R, 25GBASE-R and 10GBASE-R
    - Alignment sync
    - FC FEC (RS2112,2080) FEC decoding and correction
  - 800G/400G/200G/100G/50G/40G/25G/10G MAC Core Features (per channel)
    - TX FCS insertion
    - TX MAC control frame generation
      - Unicast/Multicast PAUSE frame generation by MAC client or by software
      - Software configurable PAUSE quanta
    - TX Performance Monitoring and Statistics (counters are 38-bit to accommodate 1-second of statistic counts)
      - Byte count
      - Frame count
      - PAUSE frame count
      - Multicast frame count
      - Unicast frame count
      - Undersize frame count
      - Oversize frame count
      - Frame count statistic for the following sized frames:
        
        64
        
        65-127
        
        128-255
        
        256-511
        
        512-1023
        
        1024-1518
        
        1519-1522
        
        1523-1548
        
        1549-2047
        
        2048-4095
        
        4096-8191
        
        8192-9215
        
        > 9215
      - RX FCS check and removal
      - RX PAUSE frame processing and handling
      - RX Performance Monitoring and Statistics (counters are 38-bit to accommodate 1-second of statistic counts)
        
        Bad FCS
        
        Bad Preamble
        
        Byte count
        
        Frame count
        
        PAUSE frame count
        
        Multicast frame count
        
        Unicast frame count
        
        Bad FCS frame count
        
        Bad byte count
        
        Bad frame count
        
        Bad aligned frame count
        
        Jabber frame count
        
        Runt frame count
        
        Undersize frame count
        
        Oversize frame count
        
        Frame count statistic for the following sized frames:
        
        64 byte
        
        65-127
        
        128-255
        
        256-511
        
        512-1023
        
        1024-1518
        
        1519-1522
        
        1523-1548
        
        1549-2047
        
        2048-4095
        
        4096-8191
        
        8192-9215
        
        > 9215
        
        Additional Add-on features
        
        HiGig, HiGig+ and HiGig-lite
        
        1588v2, OAM, OWAMP, TWAMP 1-step and 2-step time stamping
        
        xGFC/FlexE/OTN/FlexO/OTU25/50-RS access port
        
        FC1200 to 256GFC FC2 Monitoring
        
        802.3br Express Traffic
        
        802.1Qbb Priority Flow Control (PFC) up to 8 priorities

Benefits

Digital Crossbar among all SerDes lanes in both TX and RX direction in the SerDes Mux/Demux
Combines Ethernet streams at a variety of rates to a single multi-channel interface at MAC
Supports 1 GE, 10GE, 25GE, 40GE, 50GE, 100GE, 200GE, 400GE and 800GE in any combination on any port or groups of ports to a maximum total bandwidth of 800Gbps
Supports IEEE 802.3 required FEC variances – LL FEC RS (272, 258), KR4 FEC RS (528,514), KP4 FEC RS (544,514), FC FEC (2112,2080)
Supports all IEEE802.3 PCS, FEC and MAC statistics and alarms and more
Supports HiGig, HiGig+ and HiGig-lite
Dynamically change rate on any port without affecting existing traffic
Standard ETC 800GE supports with bonded 2 x 400GE PCS and a single 800G MAC
Fully utilize the advantages of 112G SerDes to get highest possible port density per 800G.
Ultralow latency and power efficient FEC Core
Supports 1588 PTP/OAM/TWAMP 1 step and 2 step and 802.3br express traffic (TSN).
Optionally provides OTN, FlexE, FlexO, OTU25/50-RS, xGFC access ports
Optional 10GFEC to 256GFC FC2 Monitoring

Multi-channel, multi-rate Ethernet aggregator - 10G to 800G ZX (e.g., Telecom)

Overview

Key Features

Benefits

Block Diagram

Applications

Technical Specifications

Related IPs