IP Catalog > Interface IP > Interconnect IP > Ethernet IP > Ethernet PHY IP > 10/100 Base-TX Fast Ethernet PHY; SMIC 40nm LL

10/100 Base-TX Fast Ethernet PHY; SMIC 40nm LL

Overview

SP-10_100_Ethernet-S40LL is a single-port DSP-based Fast Ethernet Transceiver. It contains all the active circuitry required to convert data stream to and from a Media Access Control (MAC) and to and from the physical media. It supports 100Base-TX and 10BASE-T networks over twisted-pair cable in full-duplex or half-duplex mode. Both the Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) are supported.

Key Features

  • SMIC 40nm logic Low Leakage Process
  • Power Supply: 1.1V and 3.3V
  • Minimum metal requirement: 7 metal layers
  • Operating Temperature: -40oC~125oC
  • Power consumption (100Base-TX) less than 140mW
  • Fully IEEE 802.3 10/100 Base-TX compliant and supports EEE
  • Integrated MDI termination resistors
  • Supports MII and RMII interfaces
  • Design for Testability with extensive testability feature and 95% fault coverage
  • Programmable loopback mode for diagnostic
  • Supports programmable LED output for different applications and power on LED Self-Test
  • Supports 24M/25M/27M REFCLK clock sources
  • Supports WOL (Wake-On-Lan) functionality

Technical Specifications

Foundry, Node
SMIC 40nm LL
Maturity
Mass Production
SMIC
In Production: 40nm LL
Request Info

Related IPs

×
Semiconductor IP