Voltage Regulator IP

Compare 341 Voltage Regulator IP from 33 vendors (1 - 10)

Energy Harvesting module with AC-DC converter for X-FAB 180nm
- Silicon proven in X-FAB XT018 FD-SOI
- Input frequency: 10Hz to 10kHz
- Power conversion rate: up to 65%
LDO Voltage Regulator, 250 mA, Adjustable 0.45 V to 0.9 V Output
- TSMC 3nm FinFET process
- Input voltage: 1.2 V
- Output voltage range: 0.45 V to 0.9 V
- Vout adjustable in 50 mV increments
LDO Voltage Regulator, 30 mA, Adjustable 0.45 V to 0.9 V Output
- TSMC 3nm FinFET process
- Input voltage: 1.2 V
- Output voltage range: 0.45 V to 0.9 V
- Vout adjustable in 50 mV increments
LDO Linear Voltage Regulator
- Supply sensitive blocs from a low-quiescent LDO
- Low leakage implementation
- Programmable output voltage
- Configurable power stages for area optimization
Custom Regulated High Capacity Charge Pump
- On-Chip Supply Rail Extension
- Extends the headroom and performance range of other on-chip blocks and components
10mA to 265mA Linear Li-Ion Battery Charger - GlobalFoundries - 0.130um BCD
- 10mA to 265mA charging current
- 3.3V to 4.35V termination voltage
- Power and charging status indicators
Capless Analog LDO Regulator
- Output current range is 0-15mA.
- Short Circuit Current Limiting and Overtemperature Protection
- Shutdown current< 312nA .
- DC load regulation< 0.99%
BGR + V-I Bandgap Reference Circuit
- Low IQ: Maximum of 50.85 µA
- Low Temperature Drift: Maximum of 103 ppm/°C
- Small Area: 0.0722 mm2
- Fast Response: Maximum 25.89 µs of wake up time
Nano power DC-DC converter in TSMC 40uLP with ultra-low quiescent current and high efficiency at light load
- Low quiescent current suitable for standby modes
- High efficiency at light load extending battery lifetime
- Low ripple level compatible with noise sensitive loads
- Low BoM cost: 1 µH inductor
Capless low input voltage LDO in GF 22FDX
- GlobalFoundries 22FDX
- Low silicon area
- Low BoM cost, no output capacitor required