8-Bit ADC IP

Compare 32 8-Bit ADC IP from 20 vendors (1 - 10)

Ultra Low Power SAR ADC - TSMC, 40LP
- TSMC 40 LP ( SVT )
- -40 to 125 Deg C
- Ultra Low Power 3.5 mW
Analog to Digital Converter 8 Bit
- Supply Voltage (typ) : 1.8 V
- Resoluton : 8 bits
- Conversion rate : 8 MS
- Vin : 0 V to 1.8 V
Analog to Digital Converter 8 Bit
- Supply Voltage: 1.8V, Area: 300um x 722.327um
- Resolution: 8 bits
- Clock Frequency: 10 MHz (typ.)
8/10-bit Analog-to-Digital Converter
- Resolution: 8b, 10b
- Sampling Rate (Fs): 1 Msps to 20Msps
- Input Signal Bandwidth: Fs/2
- SINAD1: Typ 54dB
8 bit SAR ADC
- 8 bits resolution.
- Supply voltage 1.6-2.0V.
- 7.3 bit ENOB.
- Sample and hold operation.
- 2-12MHz clock frequency.
- Gated clock.
- Requires reference and reference/2 bias.
SPI/BOSCH Verification IP
- Follows SERIAL_FLASH basic specification as defined in Bosch SMB380 Triaxial acceleration sensor
- Support Master and Slave Mode
- Supports data width of 8 bit
- Supports 3-wire,4-wire interface
MIPI_DEBUG_UART Verification IP
- APB common support
- Supports different transfer types including IDLE, WRITE and READ.
- Supports unaligned address accesses.
- Slave memory map support.
2.5GBase-KX/5GBase-KR/2.5GBase-T/5GBase-T Verification IP
- Follows 2.5GBase-KX/5GBase-KR/2.5GBase-T/5GBase-T specification as defined in IEEE 802.3cb
- Supports scrambler
- Supports backplane auto-negotation
- Supports CDR for serial protocols
10BASE-T1S Verification IP
- Supports 10BASE-T1S as per specification IEEE 802.3cg-2019
- Supports MII
- Supports Self-synchronizing Scrambler/Descrambler
- Supports 4b/5b Encoding/Decoding
100BASE-T1 Verification IP
- Supports 100BASE-T1 as per 802.3.bw
- Supports 4b/3b encoding
- Supports scrambler
- Supports 3b2T symbol mapping