Voltage Regulator IP for UMC
Welcome to the ultimate Voltage Regulator IP for UMC hub! Explore our vast directory of Voltage Regulator IP for UMC
All offers in
Voltage Regulator IP
for UMC
Filter
Compare
18
Voltage Regulator IP
for UMC
from 5 vendors
(1
-
10)
-
IR DROP UMC
- • Active current current: 120uA
- • Powered-down current: <1uA
- • Detection time: 25nS typ.
- • Hysteresis: 20mV typ.
-
Power-On-Reset UMC
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments
-
Linear LDO Low-Dropout Voltage Regulator UMC
- Input Voltage Range: PDK VddIO
- Programmable Output Voltage Range
- Current Load: <1mA to 100mA
- PSRR
-
-
On-Chip IO to Core Voltage Buck Regulator on UMC 55nm ULP
- Input voltages of 2.5V, and 3.3V.
- Available output currents to 100mA.
- Available output voltages 0.91V to 1.2V.
- Works with straight-through IO pads.
- Soft startup.
- Optional frequency sync input.
- 10mVpp ripple.
-
75mA Core Voltage Regulator
- Input voltage range 3.0V – 3.3V.
- Output voltage 1.2V or 1.8V ±4%.
- Output short circuit protection.
- Bundled with Obsidian 1.2V bandgap reference.
- Power down/enable input.
- Fast response to current steps.
-
LDO General purpose Ultra Fast Response Series ( Vin = 2.7-5.5V; Vo = 3.0-3.6V; Io = 100mA ) - UMC 40nm
- LDO general purpose Low-Dropout regulator
- Available with eight programmable output currents range
- Fast transient response
- Soft start and over current protection
-
LDO Capless Fast Response Series ( Vin = 2.4-5.75V; Vo = 0.9-1.5V; Io = 30mA ) - UMC 130nm
- LowSoft start and over current protection-DropouFast transient responset Regulator (LDO) with enable
- Soft start and over current protection
- Power good detector
- Over temperature detector
-
LDO Capless Fast Response Series ( Vin = 2.4-5.75V; Vo = 2.225-3.025V; Io = 10mA ) - UMC 130nm
- LowSoft start and over current protection-DropouFast transient responset Regulator (LDO) with enable
- Soft start and over current protection
- Power good detector
- Over temperature detector
-
DC-DC Buck Ultra Fast Response High Power Series ( Vin = 2.3-4.6V; Vo = 1.5-2.0V; Io = 800mA ) - UMC 40nm
- DC-DC PWM BUCK ultra fast response high power
- Seamless auto switching between PWM/VFM
- Available in multiple output versions: fixed and 4-8 bit programmable
- Available with seven output current ranges: from 300 mA to 3.0 A