Analog IP for LFoundry
Welcome to the ultimate Analog IP for LFoundry hub! Explore our vast directory of Analog IP for LFoundry
All offers in
Analog IP
for LFoundry
Filter
Compare
10
Analog IP
for LFoundry
from 3 vendors
(1
-
10)
-
General Purpose PMU - Thermal shutdown and overvoltage protected - SilTerra 0.18 um
- This macro-cell is a Power Management Unit (PMU) core designed for Silterra 0.18µm C18GH5 CMOS technology in TO (thick oxide) and HP (thin oxide) process.
- The circuit has two linear voltage regulators (one of which has an external feedback connection), internal voltage and bias current generators, built-in poweron-reset (POR), thermal shutdown and overvoltage protection.
-
Ultra Low Power PMU - (2.18µW) - SilTerra 0.18 um
- This macro-cell is an ultra low consumption Power Management Unit (PMU) core designed for Silterra 0.18µm C18G CMOS technology TO (thick oxide) and HP (thin oxide) process.
- The circuit has a shunt regulator, internal voltage and bias current generators, built-in power-on-reset and oscillator.
-
General Purpose 10-bit DAC - 10 bits, 2MSPS, buffered output option - LFoundry 0.15µm LF150 CMOS
- This macro-cell is a general purpose, 10-bit, 2MSPS, resistive Digital-to-Analog Converter (DAC) core designed for LFoundry 0.15μm LF150 CMOS technology STD (Standard) and LP (Low Power) process.
- The circuit has internal optional buffer to drive directly light loads and is optimized for low power consumption.
-
Ultra Low Power 8-bit ADC - Ultra Low Voltage (1V), Ultra Low Power (850nA) - LFoundry 0.15µm
- This macro-cell is a general purpose, ultra low power, 8-bit, time-based Analog-to-Digital Converter (ADC) core designed for LFoundry 0.15μm LF150 CMOS technology STD (Standard) and LP (Low Power) process.
- The circuit is ideal for general purpose/auxiliary low frequency measurements (such as power supply voltage monitor) in applications in which ultra low power consumption is mandatory.
-
Bandgap Voltage Reference Low TC (13ppm/ °C), PSRR-42 dB @ 100kHz
- This macro-cell bandgap voltage reference generator core designed for SilTerra 0.18µm CL18GH5 CMOS technology.
- The core is ideal as a general purpose reference voltage in applications where low TC is required with quick response dynamic.
-
ISDB-T1, Segment Tuner (470-860MHz UHF)
- High Performance
- Configurable 3/4 wire controller
- Self calibrating and programmable filter corner frequencies
- 8 Bit electronically tunable tracking filter
-
802.11 A/B/G/N Direct Conversion Transceiver
- Fully Integrated 802.11 a/b/g/n Transceiver
- High Performance
- Low Power Consumption
-
Sub-GHz 868, 915MHz RF Transceiver
- Multi-Band 868/915MHz
- Supply Voltages: 1.9 to 3.6V
- Junction Temperature Range -40 to +85C
-
Sub-GHz 433MHz RF Transceiver IP
- RF Frequency: 433MHz
- Supply Voltage: 1.8 to 3.6V
- Junction Temperature Range 0 to +70C
- RF Output Power range -3dBm to +3dBm
-
RF and Analog GPS/GNSS Front End for GPS, GLONASS, Galileo and Beidu
- Single Channel Mode
- Block Conversion mode
- Configurable 3/4 wire controller
- 2/3 bits A/D detection