USB3.x DEVICE IIP

Overview

Key Features

• USB 3.0/3.1/3.2 Common support
  • Compliant with USB 3.0/3.1/3.2 specification
  • Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
  • Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
  • Configurable PIPE Interface width 8, 16 or 32 bits
  • Supports Low frequency periodic signaling (LFPS) for initialization and power management(U1, U2 & U3)
  • Supports Interrupt/Bulk/Isochronous/Control Transfers
  • Control transfers supported by Endpoint 0
  • Separate Endpoint Buffers for IN bound and OUT bound packets
  • Supports lane polarity inversion
  • Supports Bulk Streaming
  • Supports extensible Host Controller Interface(xHCI)
  • Supports Scrambler/Descrambler
  • Option to enable/disable scrambling
  • CRC checking and generation
  • Supports Protocol Layer Error Handling.
  • Provides prioritized scheduling for periodic endpoints.
  • Separate round robin scheduling algorithm within Periodic and Non-periodic endpoints pipes.
  • Supports PTM
  • Implements support for multiple outstanding IN transactions directed to different endpoints.
  • Implements Type 1 and 2 Buffers
  • Supports Master and Slave Loopback mode for PHY layer testing
  • Supports Compliance mode entry as per specification.
  • Supports USB Suspend state and supports remote wakeup devices.
  • Supports all SS/SSP Link Power Management States – U1, U2, U3
  • Supports all HS/FS USB Link Power Management States – L1, L2.
  • Supports system low power and related system states such as Sleep,Hibernate, Warm/ Cold boot etc.
  • Support for clock gating and multi-power-well support
  • This core achieves ASIL B and can be made to achieve ASIL D as per ISO26262
• USB 3.0
  • Supports Gen1 super speed with 5GT/s data rate
  • Supports single lane
  • Supports ADP,HNP,SRP and RSP
  • Supports LCRD_A to LCRD_D Credits
• USB 3.1
• In addition to USB3.0 features,USB3.1 supports the following features
  • Supports SuperSpeedPlus LFPS Based PWM Message (LBPM)
  • Supports Gen2 with SuperSpeedPlus and Gen1 with Super speed
  • Supports specific LFPS patterns(SCD1/SCD2) for Super speed plus ports
  • Supports SuperSpeedPlus Precision Time Measurement
  • Supports SuperSpeedPlus Transaction Reordering for periodic and asynchronous packet
  • Supports Length field replica
  • Supports Endpoint companion descriptor
  • Supports Type-A and Type-B credits
  • Supports 128B/132B Encoding/Decoding
• USB 3.2
• In addition to USB3.0 and USB3.1 features, USB 3.2 supports the following features.
  • Supports Dual lane
  • Supports Gen2 with SuperSpeedPlus and Gen1 with Super speed
  • Supports Deskew buffer
  • Supports Data striping in dual lanes
  • Supports Configuration summary descriptor
  • Supports link error count and soft error count
  • Supports retimer connectivity models
  • Supports all the Retimer state machine states[RTSM]
  • Supports SRIS and Bit-Level Retimers functionality
  • Supports Retimer presence announcement through LBPM
• Support DMA (Optional)
• Fully synthesizable.
• Static synchronous design.
• Positive edge clocking and no internal tri-states.
• Scan test ready.
• Simple interface allows easy connection to microprocessor/microcontroller devices

Benefits

• Single Site license option is provided to companies designing in a single site.
• Multi Sites license option is provided to companies designing in multiple sites.
• Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
• Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.

Block Diagram

Deliverables

• The USB3.x Device interface is available in Source and netlist products.
• The Source product is delivered in verilog. If needed VHDL, SystemC code can also be provided.
• Easy to use Verilog Test Environment with Verilog Testcases
• Lint, CDC, Synthesis, Simulation Scripts with waiver files
• IP-XACT RDL generated address map
• Firmware code and Linux driver package
• Documentation contains User's Guide and Release notes.
• ISO26262 Safety Manual (SAM) Document
• ISO26262 Failure Modes, Effects and Diagnostics Analysis (FMEDA) Document

Technical Specifications