USB1.1 PHY
Overview
The USB11PHY is an IP version of USB transceiver. It receives data with DP and DM and transfers data to USB11 core with RCV, VM and VP. It is designed in standard logic to interface with the physical layer of Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12M bit/s) and low speed (1.5M bit/s) data rates. The serial interface engine (SIE) controls the state of USB11PHY through the OEN signal. When in receiving mode, it receives data on the output RCV, VM and VP of USB11PHY, when in transmitting mode, it drives the input VPO and VMO of USB11PHY.
Key Features
- complies with USB1.1 standard
- uses SMIC 0.25um generic process
- utilizes digital inputs and outputs to transmit and receive USB cable data
- supports 12Mbit/s full speed and 1.5Mbit/s low speed serial data transmission
- supports single-ended data interface
- levelshift is built in
- 20ohm series resistors are included
- I/O core power supply 3.3v/2.5v
Technical Specifications
Foundry, Node
SMIC 0.25um
Maturity
GDS Ready
Availability
Now
SMIC
Pre-Silicon:
250nm
G