USB 3.1 Type-C PHY IP, Silicon Proven in SMIC 14SF+

Overview

The USB3.1Type-C PHY is a high-performance, high-speed SERDES IP designed for semiconductors that support low-power, high-bandwidth data transfers. The USB 3.1Type-C PHY IP is a particular design for USB 3.1 type-C applications. To fulfil the functionality of various applications, such as elastic buffer, scramble/de-scramble, data encoding/decoding, PRBS generation checking, registers control, and testing, a separate PCS can be offered in addition to the USB 3.1 Type C PHY IP. PCS is available as a hard macro or a soft macro, depending on the customer's need. Additionally, the PCS standard will be made independently accessible. The NC-Verilog simulation program validates PHY functionality using a test bench developed in Verilog HDL.

Key Features

Support half rate mode (5Gbps) and full rate mode (10Gbps)
Tolerate max +/-7000ppm input frequency offset
32bit/40bit selectable parallel data bus
Programmable transmit amplitude
3 taps/2 taps selectable FFE
Receiver CTLE and One-tap perspective DFE
Build in self-test with PRBS7/31 pattern generation and checker for production test
Integrated on-die termination resistors
Support receiver detection
Support LFPS signal generation and detection
Support Spread Spectrum clock generation and receiving
Flexible reference clock frequency
Do not need any external component
ESD: HBM/MM/CDM/Latch Up2000V/200V/500V/100mA
Metal Layer:M1~M7+RDL
Core Voltage: 1.1V
IO Voltage: 3.3V
Silicon Proven in SMIC 14SF+

Block Diagram

Deliverables

GDSII & layer map
Place-Route views (.LEF)
Liberty library (.lib)
Verilog behavior model
Netlist & SDF timing
Layout guidelines, application notes
LVS/DRC verification reports

Technical Specifications

Maturity

In Production

Availability

Immediate

Request Info