MIPI CSI2 rev 2.0 transmitter/controller for FPGA, with 8 lanes and 2.5Gbps per lane
Overview
The SVTPlus-CSI2-F is a second generation MIPI CSI2-Tx transmitter IP core for FPGA implementations. It complies with MIPI® CSI2 V2.0 and DPHY1.2 specifications, with up to 8 data lanes, at up to 2.5GBPS per lane. Total available bit rate is 20Gbps, supporting, for example, 7680x4320 (8K) images at 60fps
Key Features
- One clock lane, and from 1 to 8 data lanes
- Simple interface – legacy parallel-video input, augmented by an Early-HD signal
- Input interface – parallel 1, 2 or 4 pixels per clock
- Can support any or all CSI2 2.0 pixel formats
- Uses simple off-FPGA analog front-end – passive or active.
- DPCM compression scheme according to CSI2 specification Annex A
- Calibration Packet generation.
- Easy-to-use Excel programming guide provided with the IP
- Comprehensive customer support, until IP integration is successfully completed
Benefits
- Up to 20GBps using DPHY 1.2
- Simple user interface
- interface to passive component or active off-FPGA analog front end
- Supports pixel compression
- Highly customized - can support any or all CSI2 video formats
- 1,2 or 4 pixels per clock - allowing to trade lower internal clock rate for FPGA resources
Deliverables
- Verilog RTL
- SDF
- Documentation
- Programmer Guide (Excel)
Technical Specifications
Maturity
New Product
Availability
Now
Related IPs
- Extended MIPI CSI2 Serial Video Receiver, 64 bits, 8 data lanes, 4 pixels/clock
- MIPI Controller IP, CSI-2 Receiver, High-Speed 80Mbps to 1.5Gbps per data lane, Soft IP
- MIPI Controller IP, CSI-2 Transmitter, High-Speed 80Mbps to 1.5Gbps per data lane, Soft IP
- MIPI CSI-2 controller Receiver v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- PCIe Controller for USB4 Hosts and Devices supporting PCIe Tunneling, with optional built-in DMA and configurable AMBA AXI interface
- 2.5Gbps Per Lane MIPI-CSI2 Compliant Serial Video Transmitter