Local Interconnect Network (LIN) Soft Controller IP
Overview
The DLIN is a soft core of the Local Interconnect Network (LIN). This interface is a serial communication protocol, primarily designed to be used in automotive applications. Compared to the CAN, The LIN is slower, but thanks to its simplicity, it is much more cost effective. Our Core is ideal for communication in intelligent sensors and actuators, where the bandwidth and versatility of the CAN is not required. The DLIN core provides an interface between a microprocessor / microcontroller and LIN bus. It can work as a master or slave LIN node, depending on a work mode determined by the microprocessor / microcontroller. This controller supports transmission speed between 1 and 20kb/s, which allows it to transmit and receive LIN messages compatible to LIN 1.3., LIN 2.1, and the newest 2.2 specification.
Key Features
- Conforms with LIN 1.3, LIN 2.1 and LIN 2.2 specification.
- Automatic LIN Header handling
- Automatic Re-synchronization
- Data rate between 1Kbit/s and 20 Kbit/s
- Master and Slave work mode
- Time-out detection
- Extended error detection
- “Break-in-data” support
- Available system interface wrappers:
- AMBA – APB Bus
- Altera Avalon Bus
- Xilinx OPB Bus
Applications
- Automotive
- Industrial
- Embedded communication systems
Deliverables
- Source code:
- VHDL Source Code or/and
- VERILOG Source Code or/and
- Encrypted, or plain text EDIF
- VHDL & VERILOG test bench environment
- Active-HDL automatic simulation macros
- ModelSim automatic simulation macros
- Tests with reference responses
- Technical documentation
- Installation notes
- HDL core specification
- Datasheet
- Synthesis scripts
- Example application
- Technical support
Technical Specifications
Foundry, Node
Independent, suitable to all 3rd party PHY's
Maturity
In Production
Availability
Immediate