IP Catalog > Peripheral IP > AMBA AHB / APB/ AXI IP > AMBA AHB / APB IP > I3C Controller IP – Master / Slave, Parameterized FIFO, APB Bus. I3C Basic Specification Design

I3C Controller IP – Master / Slave, Parameterized FIFO, APB Bus. I3C Basic Specification Design

Overview

The DB-I3C-BASIC-MS-APB Controller IP Core interfaces a microprocessor via the AMBA APB Bus to an I3C Bus, compliant to the MIPI I3C – BASIC v1.0 Improved Inter Integrated Circuit specification. The I3C Basic serves as an upgrade path to the I2C standard.

The I3C is a two-wire bidirectional interface standard (SCL is Clock, SDA is Data) for transfer of bytes of information between two or more compliant I3C devices as well as legacy I2C Slave devices.

The DB-I3C-BASIC-MS-APB is a I3C Controller supporting I3C SDR Broadcast & Direct Messages, and Legacy I2C Messages.

In an ASIC / ASSP / FPGA integrated circuit, typically, the microprocessor is an ARM or RISC-V processor, but can be any embedded processor. Figure 1 depicts the system view of the DB-I3C-BASIC-MS-APB Controller IP Core embedded within an integrated circuit device with its Microprocessor Configuration.

Key Features

  • Master / Slave MIPI I3C Controller
  • Supports following I3C bus speeds:
    • Single Data Rate (SDR) - up to 12.5 MHz
  • I3C Communications Support:
    • I3C SDR / Broadcast / Direct Messages
    • Legacy I2C Message
  • I3C compliant features:
    • I3C Characteristics Registers
    • Common Command Codes (CCCs)
    • Dynamic Addressing Assignment
    • Secondary Master Function
    • In-Band Interrupt
    • Hot-Join Mechanism
    • Multi-Drop capability
    • I3C Error Processing
  • Parameterized FIFO memory for off-loading the I3C transfers from the processor:
    • Targets embedded processors with the I3C Controller independently controlling the I3C Message with bytes of information buffered to andfrom a FIFO.
    • FIFO parameterizable in depth and width
  • System-level features & integration capabilities:
    • CPU Interface to Control / Status Registers & parameterized FIFO with support for APB / AHB / AXI / AXI-lite / Avalon SoC Interconnectfabrics
    • Internal Interrupt Controller (Interface to embedded processor)
  • Optional system-level features & integration capabilities:
    • DMA transfer between the I3C Bus & Memory (SDRAM / SRAM / FLASH)
  • Compliance with I3C, I2C, and AMBA specifications:
    • MIPI Alliance – Specification for I3C Basic – Improved Inter Integrated Circuit, Version 1.0, 19 July 2018 (doc “I3C-Basic-Spec-ver1_0”)
    • Philips/NXP – The I2C-Bus Specification, Version 2.1, January 2000 and UM10204 Rev 6 – 4 April 2014
    • Compliance with AMBA Specification – APB
  • Fully-synchronous, synthesizable Verilog RTL core, with rising-edge clocking, no gated clocks, and no internal tri-states, for easy integration into FPGA or ASICdesign flows.
  • Low Power Verilog RTL design

Block Diagram

I3C Controller IP – Master / Slave, Parameterized FIFO, APB Bus. I3C Basic Specification Design Block Diagram

Deliverables

  • The DB-I3C-BASIC-MS-APB is available in synthesizable RTL Verilog and a technology-specific netlist for FPGAs, along with Synopsys Design Constraints, a simulation test bench with expected results, datasheet, and user manual.

Technical Specifications

Foundry, Node
Chartered, IBM, LSI. OKI, Silterra, SMIC, STMicroelectronics, Tower, TMSC, UMC, GLOBALFOUNDRIES, Renesas, Samsung, HHGrace
Maturity
Successful in Customer Implementations
Availability
Immediately
Request Info

Related IPs

×
Semiconductor IP