HaLow 802.11ah Transceiver for IoT

Overview

PCS HaLow 802.11ah Transceiver compliant to the IEEE 802.11ah low power, long range WiFi standard. Suitable for IoT, M2M, and V2V (Vehicle to Vehicle) applications requiring long battery life and long range reliaibilty. The transceiver operates in the Sub GHz range an is implemented in standard CMOS. It is designed as block level GDS IP and is easily integrated into and SoC/ASIC.

Key Features

Integrated single-ended directed Rx with noise less than 3dB
Capable of processing signals form -112dBm to -10dBm
Integrated DC offset correction & I/Q calibration scheme
Highle linear architecture for
Minimal latency of 1us in the receiver
Max opput transmite power of -10dBm
Integrated 20bit SD frational- PLL with 20Hz step size
Integrate rms phase noise of 0.5 degrees
Integrated crystal oscillator
Total Rx current of 18.3mA and Tx current of 22mA at max power

Benefits

Will extend battery life
Reduces the total power foot print of the SoC/ASIC
Completely tested and complaint to IEEE 802.11ah
Ready for integration on an SoC/ASIC
Interfaces easily to FPGA for prototyping/testing

Block Diagram

Applications

IoT, IoE, M3M, V2V, V2I
Any appllcation where distance and reliability are system requirement
Any application wihere low power or extended battery life is a requirement

Deliverables

GDS
User/Integration Guide
Integration Support
Systems

Technical Specifications

Foundry, Node

TSMC 40nm LP

Maturity

Silicon Proven

Availability

Immediate

Request Info