Vendor: T2M GmbH Category: Single-Protocol PHY

GbE (10/100/1000 Base-T) PHY IP, Silicon Proven in SMIC 28SF

The GPHY is a integrated single chip for Giga 10/100/1000 Ethernet applications with minimal power consumption.

Contact Provider Request Datasheet

Overview

The GPHY is a highly integrated single chip for Giga 10/100/1000 Ethernet applications with minimal power consumption. It is capable of operating in 10BASE-T, 100BASE-TX, and 1000BASE-T. This GPHY links the GMII-based Media Access Control Layer (MAC) (Giga Media Independent Interface). This GPHY uses either RGMII or GMII to connect to the Media Access Control Layer (MAC). For 100BASE-TX Fast Ethernet and 1000BASE-T Giga Ethernet, it may support Unshielded Twisted Pair Category 5 Cable (UTP5), or UTP5/UTP3 cable for 10BASE-T Ethernet. It includes the Physical Coding Sub-layer (PCS), Physical Medium Attachment Layer (PMA), Twisted Pair Physical Medium Dependent Sub-layer, and the whole physical layer function of 100BASE-TX described by IEEE802.3u and 1000BASE-T specified by IEEE802.3ab (TP-PMD, 100BASE-TX only).

Key features

  • IEEE 802.3-2008, IEEE 802.3az fully standards compliant
  • IEEE 1588-2008 support
  • BroadR-Reach™ support
  • Dual port MAC interface: GMII (10/100/1000BASE-T), MII (10/100BASE-T).
  • Auto-negotiation support
  • Automatic detection and correction of pair swaps (Auto-MDIX), pair skew and pair polarity
  • 6 different operating modes: 1000BASE-T Full Duplex and Half Duplex, 100BASE-TX Full Duplex and Half Duplex, 10BASE-T Full Duplex and Half Duplex
  • Management interface
  • Baseline wander compensation
  • On-chip transmit wave-shaping
  • On-chip hybrid circuit
  • 10KB jumbo frames
  • Internal, external and remote loop back
  • Hardware configuration for default operation
  • Power down mode, interrupt support
  • IEEE 1500 support for SoC testing integration
  • LED indication: link mode, status, speed, activity, and collision
  • Silicon Proven in SMIC 28nm SF

Block Diagram

GbE (10/100/1000 Base-T) PHY IP in 28SF block diagram

What’s Included?

  • Detailed Datasheet
  • Verilog behaviour model (A) for simulation
  • Liberty (db./.lib) for synthesis, STA, and equivalence checking
  • CTL / CTLDB for DFT
  • SPF (Standard Test Interface Language (STIL) Procedure File) for ATPG
  • LEF for APR
  • CDL for LVS connection

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Specifications

Identity

Part Number
GbE (10/100/1000 Base-T) PHY IP in 28SF
Vendor
T2M GmbH

Provider

T2M GmbH
T2M GmbH is the leading Global Technology Company supplying state of the art complex semiconductor connectivity IPs and KGDs, enabling the creation of complex connected devices for Mobile, IoT and Wearable markets. T2M's unique SoC White Box IPs are the design database of mass production RF connectivity chips supporting standards including Wifi, BT, BLE, Zigbee, NFC, LTE, GSM, GNS. They are available in source code as well as KGD for SIP / modules. With offices in USA, Europe, China, Taiwan, South Korea, Japan, Singapore and India, T2M’s highly experienced team provides local support, accelerating product development and Time 2 Market.
Contact T2M GmbH

Learn more about Single-Protocol PHY IP core

UFS Goes Mainstream

UniversalFlash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniPro as well as eMMC form factors to simplify adoption and development.

Design IP Faster: Introducing the C~ High-Level Language

In this paper, we introduce a new high-level, dataflow programming language called C~ (“C flow”) that further increases productivity by raising the level of abstraction from behavioral descriptions, while overcoming the limitations of C for hardware design. We present the syntax and semantics of this language, and the framework that provides hardware and software code generation. This paper illustrates the benefits of using C~ for hardware design of a IEEE 802.3 MAC, synthesized for FPGA and for 90nm CMOS technology.

Universal Flash Storage: Mobilize Your Data

Universal Flash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniProSM as well as eMMC form factors to simplify adoption and development.

Can MIPI and MDDI Co-Exist?

Since MIPI and MDDI standards both target interfaces to cameras and displays on mobile devices, are two separate standards really needed?

Frequently asked questions about Single-Protocol PHY IP

What is GbE (10/100/1000 Base-T) PHY IP, Silicon Proven in SMIC 28SF?

GbE (10/100/1000 Base-T) PHY IP, Silicon Proven in SMIC 28SF is a Single-Protocol PHY IP core from T2M GmbH listed on Semi IP Hub.

How should engineers evaluate this Single-Protocol PHY?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Single-Protocol PHY IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP