DDR3 interface provides full support for the DDR3 interface, compatible with JESD79-3F specification and DFI-version 2.0 or higher Specification Compliant. Through its DDR3 compatibility, it provides a simple interface to a wide range of low-cost devices. DDR3 IP is proven in FPGA environment. The host interface of the DDR3 can be simple interface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol.
DDR3 SDRAM Controller IP with advance feautures package
Overview
Key Features
- Supports DDR3 protocol standard JESD79-3F Specification.
- Compliant with DFI-version 2.0 or higher Specification.
- Supports all the DDR3 commands as per the specs. Supports up to 16 AXI ports with data width upto 512 bits.
- Supports controllable outstanding transactions for AXI write and read channels
- Supports in port arbitration and multi-port arbitration.
- Supports user programmable page policy.
- Closed page policy
- Open page policy
- Supports Error Checking and correction (ECC).
- Supports retry on ECC error, with retry limit user controllable.
- Supports high clock speeds in ASIC and FPGA. Supports low latency for write and read path. Supports reordering of transactions for higher performance.
- Supports 512MB, 1GB, 2GB, 4GB, 8GB densities. Supports 8 internal banks.
- Supports X4, X8, X16 devices.
- Supports all speed grades as per specification.
- Quickly validates the implementation of the DDR3 standard JESD79-3F.
- Supports Programmable Write latency and Read latency.
- Supports On-the-fly for burst length.
- Supports Programmable burst lengths: 4,8. Supports the following burst order.
- Sequential
- Interleave
- Supports for All Mode registers programming. Supports for Write data Mask.
- Supports for Power Down features.
- Supports for input clock stop and frequency change. Supports for DLL.
- Supports for Write levelling. Supports for ZQ Calibration.
- Supports for automatic self-refresh.
- Supports for ODT (On-Die Termination).
- Build in self-test to test all locations in memory to identify damaged locations.
Benefits
- Single site license option is provided to companies designing in a single site.
- Multi sites license option is provided to companies designing in multiple sites.
- Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
- Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.
Deliverables
- The DDR3 interface is available in Source and netlist products.
- The Source product is delivered in plain text Verilog. If needed VHDL, SystemC code can also be provided.
- Easy to use Verilog Test Environment with Verilog Testcases
- Lint, CDC, Synthesis, Simulation Scripts with waiver files
- IP-XACT RDL generated address map
- Firmware code and Linux driver package Documentation contains User's Guide and Release notes.
Technical Specifications
Maturity
In Production
Availability
Immediately