IP Catalog > Interface IP > Memory Interface IP > DDR IP > DDR2 IP > DDR2 Controller IP > DDR2 SDRAM Controller IP

DDR2 SDRAM Controller IP

Overview

DDR2 interface provides full support for the DDR2 interface, compatible with JESD79-2F specification and DFI-version 2.0 or higher Specification Compliant. Through its DDR2 compatibility, it provides a simple interface to a wide range of low-cost devices. DDR2 IP is proven in FPGA environment. The host interface of the DDR2 can be simple interface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol.

Key Features

  • Supports DDR2 protocol standard JESD79-2F Specification.
  • Compliant with DFI-version 2.0 or higher Specification.
  • Supports all the DDR2 commands as per the specs. Supports up to 16 AXI ports with data width upto 512 bits.
  • Supports controllable outstanding transactions for AXI write and read channels
  • Supports in port arbitration and multi-port arbitration.
  • Supports user programmable page policy.
  • Closed page policy
  • Open page policy
  • Supports Error Checking and correction (ECC).
  • Supports retry on ECC error, with retry limit user controllable.
  • Supports high clock speeds in ASIC and FPGA. Supports low latency for write and read path. Supports reordering of transactions for higher performance.
  • Supports double data rate interface.
  • Supports 128MB,256MB, 512MB, 1GB, 2GB, 4GB densities.
  • Supports 8 internal banks.
  • Supports X4, X8, X16 devices.
  • Supports all speed grades as per specification.
  • Quickly validates the implementation of the DDR2 standard JESD79-2F.
  • Supports Programmable Write latency and Read latency.
  • Supports Programmable burst lengths: 4,8. Supports the following burst types.
  • Sequential
  • Interleave
  • Supports for burst sequence.
  • Supports for All Mode registers programming. Supports for Extended Mode registers programming.
  • Supports for Write data Mask.
  • Supports for Power Down features. Supports for Self-Refresh mode.
  • Supports Auto precharge option for each burst access.
  • Supports for input clock stop and frequency change. Supports for ODT(On-Die Termination).
  • Supports for DLL. Fully synthesizable
  • Static synchronous design.

Benefits

  • Single site license option is provided to companies designing in a single site.
  • Multi sites license option is provided to companies designing in multiple sites.
  • Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
  • Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.

Deliverables

  • The DDR2 interface is available in Source and netlist products.
  • The Source product is delivered in plain text Verilog. If needed VHDL, SystemC code can also be provided.
  • Easy to use Verilog Test Environment with Verilog Testcases
  • Lint, CDC, Synthesis, Simulation Scripts with waiver files
  • IP-XACT RDL generated address map
  • Firmware code and Linux driver package Documentation contains User's Guide and Release notes.

Technical Specifications

Maturity
In Production
Availability
Immediately
Request Info

Related IPs

×
Semiconductor IP