Common Public Radio Interface (CPRI) v.5.0 IPC

Overview

CPRI (Common Public Radio Interface) is an interfacing standard for high-speed communication of digital radio samples and control data between wireless infrastructure base station inter-modules. MTI’s IPC-CPRI-v.5.0 solution enables the quickest and most reliable deployment of REC (Radio Equipment Controller) interfaces for easy and flexible interfacing to Remote Equipment. It includes all features required to support MC-GSM/LTE/WCDMA/WiMAX standards. MTI’s IPC-CPRI-v.5.0 is a self-contained and fully tested solution compliant with the latest CPRI v.5.0 specification and the market leading solution used today in many eNb field installations as well as in Tier1 DSP ASICs and FPGAs devices.

Key Features

Standards: CPRI v.5.0: 2011-09-29 [CPRI] and earlier
Air Interfaces Supported: 3GPP GSM/EDGE RAN R9, 3GPP UTRA (UMTS WCDMA), 3GP-E-UTRA (LTE), IEEEE 802.16 (WiMAX)
Applications and Technologies Supported: REC
Line Baud Rates: From 614.4 Mbps up to 9.830 Gbps
Master / Slave Mode: Yes
Sample Widths:

Option 1: 15/16 bits
Option 2: from 4 to 20 bits

Mapping options: [CPRI] Section 4.2.7.2.1/2/3
Mapping modes: [CPRI] Section 4.2.7.2.4 / 5 / 7
Maximum Number of Data Carriers: 48 AxC
Low Latency Auxiliary Interface for Routing / Chaining: Yes
Start-up Sequence and Rate Auto-Negotiation: Yes
Debug Loopbacks: Yes L1 / L2
Transmitter

PCS (Delay Calibration, 8b10b encoder): Yes
Scrambling: Yes

Receiver

PCS (Aligner and Phase Compensation, 8b10b decoder): Yes
Scrambling: Yes

Delay Management: Yes

Receive delay measurement including align delays: Yes
Transmit delay calibration: Yes

Control and Management

Ethernet: Yes
HDLC: Yes
VSS: Yes
L1-Inband: Yes
Synchronization: Yes

Benefits

Multi-Standard Support
Fully Featured:

Enables individual or simultaneous operations for MC-GSM, UTRA, E-UTRA and WiMAX standards.

Silicon Agnostic: Enables Plug & Play and High Capacity operations with rates up to 9.8 Gbps in full compliance to ORI 1.0 and IR interface requirements.
Fully Flexible and Future Proof:

Designed in VHDL-83 and targeting any RTL implementation like ASICs, ASSPs and FPGAs. The design is modular and configurable. Optional support for full range sample widths (4 bits to 20 bits).

Enable low cost implementations:

Leveraging clock rates at 1/40 of the baud rate, it enables low cost FPGA implementations.

Advanced Delay Measurement:

Measurement resolutions below 1-ns in full compliance to CPRI v.5.0 for multi-hop apps.

Interoperable with most of OEMs Radio Equipments (RE):

Protocol interoperability has been conducted with most of the Tier1 and Tier2 OEM RE equipments implementation with regression test environment and on the field.

Deliverables

Product Brief
User Manual
Verification Guide
Regression Test Environment for Simulation
Test Cases, Test Report and Tools
IPC Block

Technical Specifications

Foundry, Node

any

Maturity

available

Availability