A complete RF Transceiver (IP/die) for adding Bluetooth Low Energy v5.2 (2.4GHz) capability to any SoC with embedded MCU via a standard SPI interface.
Integrated BLE Link Layer enables data rates of 2Mbps for High Speed Bluetooth connectivity & Long Range for connection range of ~100 meters.
Standard SPI interface plus chip select & packet sync pins for interfacing to an MCU or SOC and accessing an integrated AES engine for data encryption/decryption. No external RAM, ROM or Flash is not required.
Low cost & simple upgrade to any embedded MCU system.
BLE v5.0 RF PHY KGD & IP
Overview
Key Features
- 2.4GHz RF Bluetooth Low Energy v5.2 Phy
- BQB Bluetooth® 5 Low Energy Certified: RF PHY Component, Link Layer, Protocol Stack SW, MESH SW
- Data Rate Supported: 2Mbps & 1Mbps
- Integrated functionality: RF Transceiver + Modem Phy, CRC & AES-CCM HW security engine, Integrated DC-DC and LDO regulator, 16MHz / 32MHz XTAL, 32KHz XTAL
- High TX Power: +10dBm
- High RX sensitivity: -97dBm (1Mb/s PHY BER=0.1%)
- Very Low Power Consumption: Standby & Deep Sleep functions
- TSMC55 ULP
Block Diagram

Technical Specifications
Short description
BLE v5.0 RF PHY KGD & IP
Vendor
Vendor Name
Foundry, Node
TSMC 40nm & 55nm
Maturity
In Production
Availability
Immediate
Related IPs
- Bluetooth Dual Mode v4.2 RF Transceiver IP
- Wi-Fi 802.11 ax/Wi-Fi 6 /Bluetooth LE v5.4/15.4-2.4GHz RF Transceiver IP for IOT Application in TSMC22 ULL
- Wi-Fi 6 (ax)+BLEv5.4+15.4 Dual Band RF IP for High-End Applications.
- Wi-Fi 7(be) RF Transceiver IP in TSMC 22nm
- Bluetooth Low Energy (BLE) RF IP
- Bluetooth 5.x Low Energy (BLE) RF Transceiver