VS1114FE is low-power, low noise 8-channel fully differential or 16 pseudo differential inputs, 24-bit, (??) analog-to-digital converters (ADCs) with an integrated low-drift internal reference voltage and an integrated PGA with gain ranging from 1 to 128. The ADC interface data integrity features provide for a very low rate of transmission errors. The VS1114FE has very flexible power-supply options. A 2.7V to 3.6V single-supply (or ±1.8-V bipolar-supply) operation is available. It also provides an integrated low-noise low drift 2.5V reference. The on-chip oscillator or an external clock can be used as the ADC clock source. Data and control communication are handled over a 4MHz(2.4576MHz), SPI-compatible interface capable of operating with a minimum of three wires. Also, Multiple devices can share a common SPI port and synchronization can be achieved. Cyclic redundancy check (CRC) and hamming code correction is available on the interface
24-bit Analog fromt end (AFE) product having sigma delta ADC for weighing scale, Strain Guage, Sensor application
Overview
Key Features
- Low power AFE having 24b ADC and PGA with integrated reference and internal oscillator
- PGA having gain of 1, 2, 4, 8, 16, 32, 64, 128
- Three power modes with output Data Rates From 1 To 19.2kSPS
- High Performance:
- INL: 1ppm
- Reference Drift: 10ppm/°C
- Gain Drift: 1ppm/°C
- Offset Drift: 10 nV/°C
- Noise: 185nVRMS at 10SPS at gain = 128
- High CMRR: -110 dB
- High accuracy, THD: -122dB
- Offset and gain calibration
- Programmable power down and reset
- Band gap reference with 10 ppm/°C drift maximum
- Internal Oscillator
- Diagnostic functions
- On-chip bias voltage generator
- Cross-point multiplexed analog inputs (8 differential or 16 pseudo differential)
- SPI Compatible Interface
- -40°C to 125°C operating temperature range
Benefits
- Ultra-low power delta sigma ADC
- High performance
- Industry best IP specifications
Applications
- Weighing scale applications
- Strain Gauge applications
- Temperature measurement
- Pressure measurement
- Industrial process control
- Portable instrumentation
Deliverables
- Datasheet
- Hard Macro (GDSII)
- Characterisation Report (as applicable)
- Abstract View (LEF)
- Integration and Customer Support
Technical Specifications
Short description
24-bit Analog fromt end (AFE) product having sigma delta ADC for weighing scale, Strain Guage, Sensor application
Vendor
Vendor Name
Foundry, Node
180nm
Maturity
Silicon validated
Availability
June 2022
Related IPs
- 24-bit 128Ksps Analog front end (AFE) having sigma delta ADC for Energy Metering application
- 24-bit 14.4Ksps Analog front end (AFE) having sigma delta ADC for Industrial process control and sensors
- 24-bit 19.2Ksps Analog front end (AFE) having sigma delta ADC for Industrial process control and low power sensors
- Single Wire Protocol (SWP) Master Analog Front End (AFE) compliant with the ETSI 102.613 standard
- Single Wire Protocol (SWP) Slave Analog Front End (AFE) compliant with the ETSI 102.613 standard
- ISO/IEC 15693 dual-interface Analog Front End (AFE) for Integrated Circuit Card (ICC)