10 100ETHERNET-T22ULP18 is a single-port DSP-based Fast Ethernet Transceiver. It contains all the active circuitry required to convert data stream to and from a Media Access Control (MAC) and from and to the physical media. It supports 100Base-TX and 10BASE-T networks over twisted-pair cable in full-duplex or half-duplex mode. Both the Media Independent Interface(MII) and Reduced Media Independent Interface (RMII) are supported.
10/100 Ethernet PHY for TSMC 22nm ULP
Overview
Key Features
- TSMC 22nm CMOS Logic Ultra Low Power process
- Power Supply: 0.9V, 1.8V and 3.3V
- Metal Stack Option:1P7M5X1Z with RDL
- Operating Temperature: -40oC~125oC
- Fully IEEE 802.3 10/100 Base-TX compliant and supports EEE
- Integrated MDI termination resistors
- Supports MII and RMII interfaces
- Design for Testability with extensive testability feature and 95% fault coverage
- Programmable loopback mode for diagnostic
- Supports programmable LED output for different applications and power on LED Self-Test
- Supports 24M/25M/27M/50M REFCLK clock sources
- Supports WOL (Wake-On-Lan) functionality
Technical Specifications
Foundry, Node
TSMC 22nm ULP
TSMC
In Production:
22nm
Pre-Silicon: 22nm
Pre-Silicon: 22nm
Related IPs
- USB-C 3.1/DP TX PHY for TSMC 12FFC, North/South Poly Orientation
- USB-C 3.1/DP TX PHY for TSMC 16FFC, North/South Poly Orientation
- USB-C 3.1/DP TX PHY for TSMC 7FF, North/South Poly Orientation
- USB 3.1 PHY (10G/5G) - TSMC N3A x1 OTG, North/South Poly Orientation for Automotive AEC-Q100 Grade 2
- USB-C 3.1 SS/SSP PHY, Type-C - TSMC N5A 1.2V, North/South Poly Orientation for Automotive AEC-Q100 Grade 2
- USB-C 3.1/DP TX PHY for TSMC N7, North/South Poly Orientation for Automotive AEC-Q100 Grade 2