Synopsys Inter-Integrated Circuit (I2C) I/O library is used for two wire interfaces to connect low-speed devices like EEPROM, A/D, and D/A converters and microcontrollers on the same bus. It is designed for higher I/O voltage supply with support for low core voltage and includes fail-safe and fail-tolerance options.
The following operating modes are supported:
Standard Mode: 100 kHz
Fast Mode: 400 kHz
Fast-Plus Mode: 1 MHz
High-Speed Mode: 3.4 MHz
1.8V/3.3V I2C 5V Failsafe Failtolerant Automotive Grade 1 in GF (12nm)
Overview
Key Features
- Input Schmitt trigger
- Compliance with I2C-bus specification and User Manual–April4, 2014, with I2C operating modes
- Filter of 50 ns for Spike rejection
- Automotive G1/G2 supported, ASIL-B certified
- Silicon validated IP
- ESD: 2KV HBM, 500V(up to 7A) CDM, Latchup: +/-100mA @ 150C
- Designed to support multiple metal stack options
- Support for flip-chip & wirebond packaging
Technical Specifications
Foundry, Node
GF 12nm - LP
Maturity
Available on request
Availability
Available
GLOBALFOUNDRIES
Pre-Silicon:
12nm
Related IPs
- 1.8V/3.3V I2C 5V Failsafe Failtolerant Automotive Grade 1 in GF (22nm)
- GPIO 1.8V Automotive Grade 1 in GF (22nm)
- GPIO 1.8V FS Automotive Grade 1 in GF (22nm)
- USB 2.0 femtoPHY in GF (22nm) for Automotive Grade 1
- MIPI M-PHY G4 Type 1 2TX2RX in GF (12nm)
- 1.8V/3.3V Switchable GPIO With 5V I2C Open Drain & Analog in 16/12nm