High-speed USB IP
Filter
Compare
253
IP
from
22
vendors
(1
-
10)
-
USB 3.2 - Validates high-speed USB designs for protocol compliance and performance
- XtremeSilica’s USB 3.2 Verification IP offers a comprehensive solution for validating designs based on the USB 3.2 specification. It supports SuperSpeed+ data rates up to 20 Gbps, ensuring protocol compliance, power management, and seamless interoperability across versions.
- The product’s advanced features include dynamic link negotiation validation, error injection, and robust debugging tools. It enables testing across a range of devices, ensuring high-speed data transfer and reliable performance in both legacy and modern USB designs
-
SLM High-Speed Access & Test IP
- The SLM High-Speed Access and Test (HSAT) IP combined with the TestMAX® ALE software uses standard high speed IO interfaces such as PCIe and USB, to get test, debug and monitoring data in and out of an SoC at Gigabit data rates and avoids the need for large numbers of test and interface pins.
- Test time can be reduced because the link between the test time and GPIO data rate is eliminated. Further, this solution provides a key component for Synopsys Silicon Lifecycle Management solution allowing manufacturing tests to be repeated in-system and in-field as well as providing high speed access to PVT and functional monitor dat
-
USB 2.0 Mass Storage Devices Design Platform
- The USB 2.0 Mass Storage Design Platform is a complete, integrated solution, dedicated to a wide range of USB-based Mass Storage Devices.
- You can use it in various applications, like portable flash memory, digital audio player, card reader or digital camera.
-
USB 2.0 Human Interface Devices Design Platform
- The USB 2.0 HID Design Platform is a complete, integrated solution, dedicated to a wide range of USB-based Human Interface Devices, like mouse, keyboard, and tablet.
-
USB 2.0 Audio Devices Design Platform
- The USB 2.0 Audio Design Platform is a complete, integrated solution, dedicated to USB-based Audio Devices, like microphones and speakers.
-
USB 2.0 OTG Dual Role Device (DRD) Controller
- Compliant with OTG Supplement Rev. 1.0a
- USB 2.0 Compliant
- Supports 480 Mbit/s (HS), 12 Mbit/s (FS), and 1.5 Mbit/s (LS)
- Supports Session Request Protocol (SRP) and Host Negotiation Protocol (HNP)
-
USB 2.0 PHY IP core
- Complies with USB specifications, rev. 2.0 and 1.1
- Complies with UTMI+ specification, level 3, rev. 1.0
- Supports 480Mb/s (HS), 12Mb/s (FS) and 1.5MB/s (LS) serial data transmission rates
- Supports 8-bit unidirectional Parallel Interface Engine (PIE) bus for HS, FS and LS modes, and Serial Interface Engine (SIE) for FS and LS modes
-
USB 2.0 OTG IP Core
- High speed support: 480 Mbit/s
- Full speed support: 12 Mbit/s
- USB 2.0 Compliant
- High/Full speed support using 8/16 bit UTMI/ULPI interface
-
USB 2.0 Hub IP Core
- The USB 2.0 Hub IP core is a USB 2.0 specification compliant hub core that supports 480 Mbit/s in High Speed (HS) mode, 12 Mbit/s in Full Speed (FS) mode, and 1.5 Mbit/s in Low Speed (LS) mode.
- The USB 2.0 Hub IP core consists of the Hub Controller, Hub Repeater, Transaction Translators, Routing Logic, and Downstream Ports.
-
USB 2.0 Host IP Core
- The USB 2.0 Host IP is a USB 2.0 specification compliant host IP core with an optional AHB, PCI, or custom host interface.
- The USB 2.0 Host IP supports 480 Mbit/s in High Speed (HS) mode. 12 Mbit/s in Full Speed (FS) mode, and 1.5 Mbit/s in Low Speed (LS) mode.