Regulator IP for Samsung

Compare 7 Regulator IP for Samsung from 2 vendors (1 - 7)

IR DROP Samsung
- • Active current current1: 120uA
- • Powered-down current: <1uA
- • Detection time1: 25nS typ.
- • Hysteresis1: 20mV typ.
Power-On-Reset Samsung
- Start-up Time: max 10us
- Configurable Threshold
- Programmable Delay
- Uses Hysteresis to avoid false resets in noisy environments
Linear LDO Low-Dropout Voltage Regulator Samsung
- Input Voltage Range: PDK VddIO
- Programmable Output Voltage Range
- Current Load: <1mA to 100mA
- PSRR
Low-voltage detector designed in Samsung Foundries 65nm LFR6LP process node
- Low-voltage monitoring solution for power-critical IoT applications (250 nA operating current)
- Embedded level shifters with isolation capabilities
Ultra-low quiescent capacitor-less LDO voltage regulator in Samsung Foundries 65nm LFR6LP
- Ultra-low quiescent current to enable very low power consumption in sleep and deep sleep mode
- Low BoM, no external capacitor required
- Embedded voltage reference
Low-power Power-On-reset design in Samsung Foundries 65nm LFR6LP process
- Low-power power-on-reset solution for power-critical IoT applications (50 nA operating current)
Combined Power-On-Reset and Low-voltage detection in Samsung Foundries 65nm LFR6LP
- Low-voltage monitoring solution for power-critical IoT applications
- The POR-LVD-[1.8-5.5]-[0.9-1.4].01 includes a Power-On-Reset used to monitor AVD and VDD supplies and to generate information to the SoC regarding the proper establishment of these AVD and VDD supplies.
- The detection threshold for VDD is fixed while the threshold for AVD monitoring is programmable. For a SoC in an ultra-low power mode, the circuits allowing a programmable threshold monitoring of AVD can be de-activated to reduce current consumption.