General-Purpose I/O (GPIO) IP for GLOBALFOUNDRIES
Welcome to the ultimate General-Purpose I/O (GPIO) IP for GLOBALFOUNDRIES hub! Explore our vast directory of General-Purpose I/O (GPIO) IP for GLOBALFOUNDRIES
All offers in
General-Purpose I/O (GPIO) IP
for GLOBALFOUNDRIES
Filter
Compare
34
General-Purpose I/O (GPIO) IP
for GLOBALFOUNDRIES
from 6 vendors
(1
-
10)
-
1.8V and 3.3V Radiation-Hardened GPIOs with Optimized LDO in GF 12nm LP/LP+
- A radiation-hardened GlobalFoundries 12nm LP/LP+ Flip-Chip IO library with both 1.8V and 3.3V GPIO, fail-safe GPI, analog cell, and associated ESD.
- Also features an LDO optimized for use with 3.3V GPIO.
-
A 65nm Wirebond IO library with 2.5V GPIO, LVDS TX & RX and 2.5V analog / RF
- GPIO:
- LVDS TX & RX
- ANALOG / RF
- Physical Attributes
-
General IO at GF 28SLP-HV Process
- Basic input/output unit for a chip with digital core
- Consisting of driver, receiver & pull-up/down resistors
- According to PAD arrangement, classified into two groups: Inline I/O & Stagger one.
- M31 also develops fail-safe or tolerance I/O for special application. The leakage current is inhibited when I/O power ramp down (Diagram A).
-
General IO at GF 130BCDLite2 Process
- Basic input/output unit for a chip with digital core
- Consisting of driver, receiver & pull-up/down resistors
- According to PAD arrangement, classified into two groups: Inline I/O & Stagger one.
- M31 also develops fail-safe or tolerance I/O for special application. The leakage current is inhibited when I/O power ramp down (Diagram A).
-
High-Speed Single-Ended to Differential Circuit
- Linear CML stage, with 0dB Gain & BW > 28GHz
- GlobalFoundries - 45SPCLO
-
High-speed IO termination cell
- 100Ω differential, 4-bit tunable
- GlobalFoundries - 45SPCLO
-
2.5V 5V Tolerant GPIO Inline IO Pad Set
- ? Fault tolerant operation – no current flow @ DVDD = 0V
- ? 5V tolerant @ 3.3V operation
- ? Multi-Voltage (1.8V, 2.5V, 3.3V)
- ? Programmable drive strength (rated 2mA to 12mA)
-
2.5V 5V Tolerant GPIO Staggered IO Pad Set
- ? Fault tolerant operation – no current flow @ DVDD = 0V
- ? 5V tolerant @ 3.3V operation
- ? Multi-Voltage (1.8V, 2.5V, 3.3V)
- ? Programmable drive strength (rated 2mA to 12mA)