USB 2.0 PHY IP, Silicon Proven in UMC 55SP/EF

Overview

The USB2.0 PHY IP is a complete physical layer (PHY) IP solution created for exceptional performance and low power consumption. The High-Speed USB 2.0 transceiver is implemented by the USB2.0 IP and can be used with hosts, devices, or OTG function controllers. The UTMI+ level 3 specification is followed by the USB2.0 PHY IP, which supports both Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) data rates. Using many mixed-signal circuits together, 480Mbps of high-speed data can be transmitted. The USB2.0 PHY IP also supports the expanded USB Battery Charging standards, which are intended for mobile and consumer product applications. The USB2.0 PHY IP transceiver's small chip size and low power consumption did not come at the expense of performance or data throughput. In order to provide complete support for host and device functionality, the USB2.0 PHY IP includes a full on-chip physical transceiver solution with Electrostatic Discharge (ESD) protection, a clock generating block provided by an internal PLL, and a resistor termination calibration circuit.

Key Features

Compliant with USB2.0 and USB1.1 specification
Compliant with UTMI Specification Version level 3.
Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
16-bit, 30MHz or 8-bit, 60MHz parallel interface for HS/FS
Serializing for transmitting data stream and Deserializing for receiving data stream
USB Data Recovery and Clock Recovery on receiving
Integrated Bit Stuffing and NRZI encoding for Transmit
Integrated Bit Un-Stuffing and NRZI decoding for Receive
SYNC and EOP generation on transmit packets and detection on receive packets
Internal reference resistor that replaces the external reference resistor
Built in self test for production testing
Supports USB suspend state and remote wakeup
Supports detection of USB reset, suspend and resume signaling
Supports high speed identification and detection as defined by USB 2.0 Specification
Support high speed host disconnection detection
Silicon Proven in UMC 5SP/EF

Block Diagram

Applications

Deliverables

Application Note / User Manual
Behavior model, and protected RTL codes
Protected Post layout netlist and Standard
Delay Format (SDF)
Frame view (LEF)
Metal GDS (GDSII)
Test patterns and Test Documentation

Technical Specifications

Foundry, Node

UMC 55SP / EF

Maturity

In Production

Availability

Immediate

Request Info