Small footprint, low power, Power on Reset for Silterra CL180G
Overview
Power on Reset IP is designed to generate global reset signal depending on 3.3V Power Supply. The output nReset is low while vcc33 is detected lower than Vth_vcc33_up, the upper threshold of comparator. Once vcc33 rise higher than Vth_vcc33_up the signal nReset goes high until vcc33 falls lower than Vth_33_dn, the lower threshold of comparator. At initial power on nReset is guaranteed to be held low for dT_nReset_up.
Key Features
- Dual 1.8V and 3.3V Power Supply Operation
- 3.3V voltage detector
- Low Power Consumption: 350uW
- 300mV Hysteresis on comparator
- Adjustable delay time via external capacitor
- Small area
- Silterra 0.18um CMOS Logic Generic process (CL180G)
- -40...+70°C operating junction temperature
- Stage: Silicon-proven
Benefits
- Cheap multi-usage license
- Small area
- Silicon proven
- Ready to supply
Block Diagram
Deliverables
- Brief Datasheet
- Design models (Verilog, .LIB)
- Application Note
- GDSII database
- Final Hard Macro placement file (.LEF)
- DRC Report
Technical Specifications
Foundry, Node
Silterra 0.18um CMOS Logic Generic process (CL180G)
Availability
Available to supply
Silterra
Silicon Proven:
180nm
Related IPs
- MIPI D-PHY Universal Tx / Rx v1.1 @1.5ghz Ultra Low Power for IoT & Wearables
- MIPI D-PHY Rx ONLY v1.1 @1.5ghz Ultra Low Power & Low Area for IoT & Wearables
- High Performance / Low Power Microcontroller Core
- Ultra low power C-programmable DSP core
- Highest code density, Low Power 32-bit Processor with optional DSP
- Ultra low power, high-performance DSP / controller RISC core