1V, micro-Power, Rail-to-Rail Input / Output Operational Amplifier

Overview

The PVOA101-028TC is a low power, general purpose op amp with a rail-to-rail input and output using a single 1V power supply. This amplifier is an ideal candidate for low power data acquisition systems, handhelds, and other portable devices where low power dissipation is important.
The amplifier provides class AB output drive with low distortion to drive both resistive and capacitive loads. The common mode input range includes both negative and positive power supply rails without phase inversion. The small signal bandwidth exceeds 3MHz.
With a low voltage single supply operation ranging from +1V to +2.5V, the PVOA101-028TC is well suited for a variety of battery-powered instrumentation, sensor and general purpose signal processing applications.

Key Features

Rail-to-Rail Input and Output
Good Resistive and Capacitive Load Drive
104dB Open Loop Gain
Low Power Sleep Mode
Unity Gain Stable
Bandwidth: 3.7MHz, G=1V/V
Slew Rate: +/- 3.5V/us
Power Supply:

Single Supply: +1V to +1.8V/+2.5V (option)
Dual Supply: +/-0.5V to +/-1.25V
Supply Current: 160uA

Compact Layout
Temp Range: -40C to +85C

Benefits

Very low power consumption
Rail-to-Rail inputs and outputs

Applications

Pressure, position, and temperature sensors
Portable handheld equipment
Battery powered applications
Medical instrumentation
Level shifters
Analog filters
Input or output buffer

Deliverables

Datasheet
Netlist (CDL)
Layout View (GDS2)
Abstract View (LEF)
Behavioral Modeling (1)
Verification Report (1)
Test Bench with Configurations (1)
Evaluation Board (1)
Integration Support
Note 1: These services are optional upon customer request

Technical Specifications

Foundry, Node

55nm LP, 65nm LP, 40nm LP, 28nm LP/HPM/HPC TSMC

TSMC

Pre-Silicon: 28nm HPC , 28nm HPM , 28nm LP , 40nm LP , 55nm LP , 65nm LP

Request Info