IP Catalog > OTN Muxponder

OTN muxponder IP

Filter
Filter
Search (8)
Compare 8 IP from 3 vendors (1 - 8)
  • 20G OTN Processor, Muxponder
    • 16 Client Ports support up to 20G of traffic presented through 16 multi-rate and multi-protocol interfaces.
    • 4 Client Signal Processors, each capable of supporting up to 10G of Client Traffic, implement the functionality of various Client-Side protocols, such as Ethernet, SDH/SONET, OTN and more.
    • A Transparent Agnostic Fabric (TAF) provides non-blocking, unidirectional, bi-directional and unrestricted multicast connectivity, supporting ODU-0/1/2/flex granularities.
    • 2 Line Signal Processors, each capable of supporting up to 10G of Line Traffic, implement the functionality of OTU2/OTU1 bearers offering multiple choices of Forward Error Correction (FEC) algorithms. The OTU2 line signals can be configured for PT20 and PT21 multiplexing.
    Block Diagram -- 20G OTN Processor, Muxponder
  • 40G OTN Processor, Muxponder
    • 16 Client Ports support up to 40G of traffic presented through 16 multi-rate and multi-protocol interfaces.
    Block Diagram -- 40G OTN Processor, Muxponder
  • 100G OTN ADM
    • 200MHz+ push button core performance.
    • All products designed from ground up to allow future datapath & channel scaling.
    • Direct access to core registers for rapid software development.
    • Errors, defects and stats provided for all client signals & OTU/ODU/OPU layers.
  • OTN Framer
    • Single chip FPGA architectures, highly efficient resource sharing with no fitting issues.
    • 200MHz+ push button performance with no timing closure issues.
    • All products designed from ground up to allow future datapath & channel scaling.
    • Enabling migration path to 100G solutions with 43G throughput today.
  • 100G Muxponder
    • The TPO404 is a 100 Gbps OTN Muxponder front-end that can map combinations of up to two 40 Gbps clients and up to ten 10 Gbps clients into an OTU4 interface.
    • TPO404 is available with or without G.709 FEC support.
  • 2.5 - 10G Muxponder
    • The TPO124 is a cost-efficient 10 Gbps OTN multiplexer on a single chip.
    • The TPO124 supports ODU0 and ODUflex mapping and connectivity.
    • The TPO124 supports flexible mixing of TDM clients, such as STM-1/4/16/OC-3/12/48 and packet clients, such as Ethernet, Fibre Channel, and video clients.
    • A built-in ODU ADM provides efficient means for performing the same type of add-drop and protection functionality on the ODU level as you would normally find in a traditional SONET/SDH add-drop MUX at the virtual container (VCn)-level.
  • 20G Muxponder
    • The TPO134 is a cost-efficient 20 Gbps single chip OTN multiplexer.
    • The TPO134 supports ODU0 and ODUflex mapping and connectivity.
    • The TPO134 supports flexible mixing of TDM clients, such as STM-1/4/16/OC-3/12/48 and packet clients, such as Ethernet, Fibre Channel, and video clients.
    • A built-in 80 Gbps ODUk cross-connect provides efficient means for performing the same type of cross-connect and protection functionality on the ODU level as you would normally find in a traditional SONET/SDH ADM/MSPP at the virtual container (VCn)-level.
  • 2.5 - 10G Muxponder
    • The TPO114 is a cost-efficient, 2.5 Gbps OTN add-drop multiplexer on a single chip.
    • The TPO114 supports both ODU0 and ODU1 connectivity through an advanced built-in lower ODU cross-connect.
    • With the TPO114 you can perform the same type of add-drop and protection functionality on the ODU level as you would normally find in a traditional SONET/SDH add-drop MUX at the virtual container (VCn)-level.
    • The TPO114 supports both the standard ODU0 mappings as well as a proprietary mapping to 155 Mbps timeslots that allows for even more efficient bandwidth utilization.
×
Semiconductor IP