Analog IP for Silterra
Welcome to the ultimate
Analog IP
for
Silterra
hub! Explore our vast directory of
Analog IP
for
Silterra
All offers in
Analog IP
for
Silterra
Filter
Compare
35
Analog IP
for
Silterra
from
7
vendors
(1
-
10)
-
General Purpose All Digital Fractional-N PLL in GlobalFoundries 22FDX
- Low jitter, suitable for many clocking applications
- Extremely small die area (< 0.01 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 2GHz
- Reference clock from 5MHz to 500MHz
-
400kHz Touch Sensor - Silterra 0.18 um
- Capacitive sensing oscillator
- 2pF sensibility
- 400kHz output frequency
-
General Purpose Temperature Sensor - 2°C accuracy – 10-bit Digital Readout - Globalfoundries 22nm FD-SOI
- CM6217co is a low-power general purpose Temperature Sensor IP featuring 12-bit parallel digital readout (2’s complement 8-bit integer and 4-bit fractional) representing temperature in °C and 2°C accuracy after calibration procedures.
- This IP requires an external clock signal and does not require an external bias voltage/current.
-
Flexible 200kHz-20MHz Oscillator - Customizable frequency, Low Power - TSMC 40nm
- This macro-cell is a flexible general purpose oscillator core designed for TSMC 40nm CRN40LP CMOS technology.
- The customized IP oscillates at a specific frequency selected between 200kHz and 20MHz, and consumes a proportional quiescent current (typ. 1.8μA to 13μA).
-
GP ULP Temperature Sensor - Built-in Sigma-Delta modulator – Low Quiescent Current - Silterra 0.18um
- This macro-cell is an ultra-low-power, general purpose temperature sensor core.
- This IP features a built-in Sigma-Delta modulator that is responsible to convert the analog signals to digital bit stream.
-
True-ULP 32.768kHz RTC Oscillator - Current Consumption<120nA - Silterra 0.18µm
- This macro-cell is a true ultra-low-power, general purpose 32.768kHz internal oscillator core consuming 120nA when fully functional.
- A 4-bit digital bus allows frequency adjust against process variations. It features built-in bias references.
-
6MHz ±1% PVT 1.8V Low Power Oscillator in Silterra 0.18um
- This macro-cell is a low-power, precision, general purpose 1.8V 6MHz ±1% PVT internal oscillator core aimed for clock generation.
- A 7 bit digital bus allows frequency adjustment against process variations.
-
6MHz 3.3V Low Power Oscillator - ±1% after trimming. Re-targetable to 1-30MHz - Silterra 0.18µm
- This macro-cell is a low-power, precision, general purpose 3.3V 6MHz ±1% PVT internal oscillator core aimed for clock generation.
- A 7 bit digital bus allows frequency adjustment against process variations.
-
ULP 32.768kHz oscillator in Silterra 0.18 um
- This macro-cell is an ultra-low power, general purpose 32.768kHz internal oscillator core aimed for RTC (real time clock) applications.
- A 6-bit digital bus allows frequency adjustment against process variations.
- It has self-biased, built-in references and doesn’t require external ones.
-
2MHz Ultra Low Power Oscillator - Ultra low power (720nW) Silterra 0.18 um
- This macro-cell is a general purpose, ultra low power internal oscillator core designed for SilTerra 0.18μm CL180G CMOS technology.
- The circuit has internal level shifting.
- A 4-bit digital bus allows frequency calibration against process variations.
