T&V Sensor is a unique solution intended to continuously monitor IC status at several on-die locations. It is able to perform core voltage and die temperature measurement. T&V Sensor consists of measuring module, core voltage/temperature sensor units. Measuring module is a calculation center which performs temperature-to-digital or voltage-to-digital conversion and is able to maintain up to 8 sensor units of any (voltage/temperature) type. TS_mode<1:0> carries out selection of measured parameter (voltage or temperature).
-40 to +125 º? Temperature & Voltage Sensor (Voltage measurement 2.0V - 3.0V)
Overview
Key Features
- iHP SiGe BiCMOS 0.25 um
- High accuracy temperature and voltage measurements
- 8 remote core voltage/temperature sensors
Block Diagram
Applications
- Die temperature monitoring
- System performance detection
Deliverables
- Schematic or NetList
- Abstract view (.lef and .lib files)
- Layout (optional)
- Behavioral model (for functional verification)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Technical Specifications
Foundry, Node
iHP SiGe BiCMOS 0.25 um
Maturity
pre-silicon verification
Availability
Now
Related IPs
- -40 to +125 º? Temperature & Voltage Sensor (Voltage measurement 2.0V - 3.0V)
- -40 to +125 ºС Temperature & Voltage Sensor (Voltage measurement 2.0V - 3.0V)
- Reference current and voltage source with temperature sensor
- On-Chip IO to Core Voltage Buck Regulator on UMC 55nm ULP
- 2730 to 3782 MHz Voltage controlled oscillator
- 2.8 to 3.3 GHz Voltage controlled oscillator