MIPI BIF IP
Welcome to the ultimate MIPI BIF IP hub! Explore our vast directory of MIPI BIF IP
All offers in
MIPI BIF IP
Filter
Compare
17
MIPI BIF IP
from 2 vendors
(1
-
10)
-
MIPI VGI Verification IP
- Compliant to version 0.9 of Draft MIPI VGI specifications.
- Full MIPI VGI Host and Peripheral functionality.
- Supports Point to Point, Full duplex communication.
- Supports 2-wire Asynchronous and 3-wire Synchronous interface.
-
MIPI TWP Verification IP
- Compliant with MIPI TWP Specification version 1.1.
- Supports ATB interface.
- Supports allows up to 111 source trace streams to be represented as a single stream and later separated by either hardware or software.
- Supports require low additional bandwidth.
-
MIPI SPP Verification IP
- Supports version 2.0 Specification.
- Full MIPI SPP Debug Test System (Master) and Target System (Slave) functionality.
- Supports Independent, Full-Duplex Communication.
- Supports dynamic sizing of SPTBs with following types.
-
MIPI HTI Verification IP
- Supports MIPI HTI version 1.0 and 1.1 specification.
- Supports Point-to-point topology
- Supports multiple lanes up to 8 lanes.
- Supports NRZ line encoding.
-
MIPI GbD USB Verification IP
- Compliant with MIPI Giga bit debug specification version 1.0/1.1
- Supports the network adaptor for USB
- Supports the trace applications
- Supports the Sneak peak applications
-
MIPI DPI Verification IP
- Supports 2.0 MIPI DPI Specifications.
- Supports Type 2, Type 3 and Type 4 Architecture.
- Supports programming display parameters
- Error Injection
-
MIPI DEBUG Verification IP
- Compliant with MIPI Debug version 1.0 specification.
- Full MIPI Debug functionality.
- Support full I3C Slave with CCC, Hot Join, IBI, DAA and HDR mode.
- Full Link and Network/Transport layer.
-
MIPI DBI Verification IP
- Compliant to MIPI DBI v2.0 Specification.
- Supports Type A, Type B and Type C Interfaces.
- Supports Type 1, Type 2 and Type 3 Architecture.
- Supports all types of Display Command Set types
-
MIPI BIF Verification IP
- Supports version 1.1 MIPI BIF Specification.
- Single wire,open drain communication interface
- Single Master and Multi-Slaves(up to 256 slaves)
- Supports Broadcast,Multicast and Unicast words.
-
MIPI TWP Synthesizable Transactor
- Compliant with MIPI TWP version 2.0 specification.
- Full MIPI Debug functionality.
- Supports all Debug CCC's and Opcodes
- Supports following three layer