Ethernet MAC IP

Welcome to the ultimate Ethernet MAC IP hub! Explore our vast directory of Ethernet MAC IP cores

The Ethernet MAC IP cores enable the host to communicate data using the Ethernet protocol (IEEE 802.3) at 10 or 100 Mbps speeds. These IP cores are composed of three main layers: the Media Access Controller (MAC), the MAC Transaction Layer (MTL), and the MAC DMA Controller (MDC).

All offers in Ethernet MAC IP

Filter

Compare 266 Ethernet MAC IP from 53 vendors (1 - 10)

Ethernet Enterprise Switch/Router IP Core - Efficient and Massively Customizable
- Full wire-speed on all ports and all Ethernet frame sizes.
- Store and forward shared memory architecture.
- Support for jumbo packets up to 32739 bytes.
Multi-channel, multi-speed Ethernet universal media access control (MAC) and physical coding sublayer IP (UMAC)
- Programmable application-side FIFO sizes (or complete bypass ) on TX, RX or both for easy integration with application logic
- Packing and unpacking logic for application to internal data path matching
- Supports line rate with minimum IFG
- Memory-based statistics counter implementation for Area/gate savings
800G Ethernet IP for AI Application
- Support 1 channel of 800GE, or a combination of up to 8 channels of 100GE, 4 channels of 200GE, and 2 channels of 400GE Ethernet channels
2.5G/1000M/100M/10M Quad-Mode MAC
- Proven IP reduces development time and risk
- Support 2.5Gbps, 1000Mbps, 100Mbps and 10Mbps PHY interfaces
- Support GMII and RGMII interface natively
10G-1.6T Ethernet/FiberChannel/FlexO Core
- PCS layer formed by bonded 2x 400GE PCS in PCS Layer
- Using 32 virtual logical lanes based on 2 x 400GE PCS to reduce power in 800G operation
1G-100G Ethernet/FiberChannel/FlexO Core
- Support any ethernet combinations (table 1) to maximum data-rate of the device
- Fully compatible with IEEE802.3 2015 and IEEE 802.3 Standards
25Gbps Ethernet and CPRI-10 FEC Layer IP Core
- Proven IP reduces development time and risk
- Upgrade process as the standard evolves
- Supports both 25GBASE-KR and 25GBASE-CR PMD interfaces
QSGMII/SGMII/1000BASE-X and MAC
- Integrated MAC and PCS for area efficiency
- Fully compatible with IEEE802.3 2015 standard, QSGMII specification 1.2, and SGMII specification 1.6 Standard
25GE/10GE/SGMII/1000BASE-X and MAC
- Integrated MAC and PCS for area efficiency
- Fully compatible with IEEE802.3 2015 standard and SGMII specification 1.6 Standard
10G-800G Ethernet/FiberChannel/FlexO Core
- Combines Ethernet streams at a variety of rates to a single multi-channel interface at the MAC