Interconnect IP for UMC
Welcome to the ultimate Interconnect IP for UMC hub! Explore our vast directory of Interconnect IP for UMC
All offers in
Interconnect IP
for UMC
Filter
Compare
238
Interconnect IP
for UMC
from 21 vendors
(1
-
10)
-
125Mbps to 16Gbps Multi-protocol SerDes PMA
- Very wide CDR range -- operates with data rates from 0.25Gbps to 12.7Gbps
- Extremely low jitter suitable for Enterprise SerDes applications
-
250Mbps to 12.7Gbps Multiprotocol SerDes PMA
- Very wide CDR range -- operates with data rates from 0.25Gbps to 12.7Gbps
- Extremely low jitter suitable for Enterprise SerDes applications
-
Complete USB Type-C Power Delivery PHY, RTL, and Software
- USB PD 3.1 compliant.
- 8 bit register interface for a low speed processor, or optional I2C interface.
- Integrated Chapter 6 protocol reduces required MPU response time to 10mS.
-
MIPI C-PHY/D-PHY Combo Universal IP in UMC 40LP
- Dual mode PHY can support C-PHY and D-PHY
- Supports MIPI Specification for D-PHY Version 1.2
- Supports MIPI Specification for C-PHY Version 1.0
-
PCI Express PHY serial link PIPE Transceiver IP cell/hard macro
- Supports 2.5Gb/s serial data rate
- Utilizes 8-bit or 16-bit parallel interface to transmit and receive PCI Express data
- Full Support for Auxiliary Power (Vaux) for Energy aware systems like Multi-Port Host Controllers
- Data and clock recovery from serial stream on the PCI Express bus
-
I2C Master Serial Interface Controller
- I2C-compatible interface
- AMBA AXI4-Lite bus
- Standard and custom data rates
- Configurable setup/hold times
-
I2C Master Serial Interface Controller
- I2C-compatible interface
- AMBA APB3 bus
- Standard and custom data rates
- Configurable setup/hold times
-
MIPI D-PHY Universal IP in UMC 40LP
- Consists of 1 Clock lane and up to 4 Data lanes
- Supports the MIPI Standard 1.1 for D-PHY
- Supports both high speed and low-power modes
-
HDMI 2.0 TX PHY 6Gbps in UMC 28HPC 1.8V, North/South Poly Orientation
- Support for key HDMI 2.0 features such as 4Kx2K resolution at 60 Hz frame rate, YCbCr 4:2:0 pixel encoding format, TMDS scrambling, High Dynamic Range (HDR), CEC 2.0, and 18.0 Gbps aggregate bandwidth
- Compliant with HDMI 2.0 and HDCP 2.3, 1.2 specification
- Optimized for low power and small area
- Timing hardened blocks enable simplified placement and design closure
-
12G PHY, UMC 28HPCP x8, North/South (vertical) poly orientation
- Supports 1.25 to 16 Gbps data rates
- Supports PCI Express,IEEE 802.3, SGMII and QSGMII,SATA, CEI-6G and CEI-11G, Serial Rapid IO (SRIO), CPRI, OBSAI, JESD204B
- Supports x1 to x16 macro configurations