USB 3.2 IP

Compare 27 USB 3.2 IP from 8 vendors (1 - 10)

USB3.2 Device Controller
- USB Device Controller with protocol-layer and link-layers implementation
- USB3 Gen2 x2 link with fallback to Gen2 x1, Gen1 x2, Gen1 x1, and backward compatibility for USB2 High/Full Speed modes
USB3.2 Retimer Controller
- Spec reference:
- Intel PIPE v4.3
- SuperSpeedPlus @10Gbps with fallback to SuperSpeed @5Gbps
- USB-Link parallel data-path 20bit for SS, and 32bit for SSP
USB3.2 Gen2x2 xHCI Host Controller
- Spec reference:
- Intel xHCI revision 1.1
- USB3.2 revision 1.0 for x2 lane SSP/SS, USB2 HS/FS /LS speed modes
- USB UTMI+ and ULPI
Super-Speed Plus USB 3.2 Hub Controller
- Supports two lanes or one lane - easily configurable
- Number of downstream ports can be easily selected
USB3.x OTG IIP
- USB 3.0/3.1/3.2 Common support
- Compliant with USB 3.0/3.1/3.2 specification
- Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
- Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
USB3.x HUB IIP
- USB 3.0/3.1/3.2 Common support
- Compliant with USB 3.0/3.1/3.2 specification
- Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
- Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
USB3.x HOST IIP
- USB 3.0/3.1/3.2 Common support
- Compliant with USB 3.0/3.1/3.2 specification
- Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2 and 3.0 OTG
- Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
USB3.x DEVICE IIP
- USB 3.0/3.1/3.2 Common support
- Compliant with USB 3.0/3.1/3.2 specification
- Supports Superspeed USB 3.0, SuperSpeedPlus 3.1, 3.2
- Configurable number of Configurations, Interfaces, Alternative Interfaces and Endpoints
USB Type-C and Power Delivery Verification IP
- Compliant with standard USB PD Rev 3.1 V1.8, Type-C Rev2.2 & USB type C Port controller interface Rev2.0 V1.3.
- Supports enabling USB4 (Gen 2/Gen 3/Gen 4) over type C Connectors.
- Supports both Standard Power range (SPR) and Extended Power range (EPR) modes of operation.
- Supports all Fixed voltage supply, Programmable power supply (PPS) and Adjustable Votlage supply (AVS).
USB 3.2 Verification IP
- Fully compliant with USB 3.2 specification version 1.1, xHCI Specification Revision 1.2, and Pipe Interface 6.1.1 with Message Bus Interface for USB3.2 Architecture with backward compatibility to USB3.1, USB3.0 and USB2.0 (including USB2.0, USB 3.0. OTG)
- Supports USB Type-C.
- Supports up to 128 devices including hub and device on any tier level.
- Supports 15 IN and 15 OUT and 1 control endpoint for each device.