SD/eMMC IP
Welcome to the ultimate SD IP hub! Explore our vast directory of SD IP
All offers in
SD/eMMC IP
Filter
Compare
98
SD/eMMC IP
from 20 vendors
(1
-
10)
-
eMMC 5.1 Host Controller
- Compliant with eMMC Specification Version 5.0
- Supports one of the following System/Host Interfaces: AHB, AXI or OCP
-
eMMC 5.1 HS400 PHY and I/O Pads in TSMC 28HPM-NS
- Silicon proven, fully compliant core
- Premier direct support from IP core designers
- Easy-to-use industry standard test environment
-
SD 3.0 / SDIO 3.0 / eMMC 5.0 Host Controller
- Memory Card / Form Factors:
- IP Details:
-
SD 4.0 UHS-II PHY TSMC 28nm HPM North-South
- Compliant with SD Specifications Part 1 UHS-II Addendum v1
- Supports data rate between 390 Mbps to 1.56 Gbps per lane
- Supports peak interface speed of 3.12 Gbps in Half-duplex mode; 1.56 Gbps in Full-duplex mode
- Sub-LVDS differential PHY signaling
-
SD 4.1 SDIO 4.1 Host Controller IP
- SD4.0
- SDIO4.0
- eMMC5.0
-
SD 3.0 / SDIO 3.0 Combo Device Controller
- Meets SD Memory Card Physical Layer Specification version 3.0
- Meets SDIO card specification ver 3.0
- Host clock rate variable between 0 and 208 MHz
- All SD bus modes supported including SPI, 1 and 4 bit SD.
-
SDIO 3.0 Device Controller
- Compliant with SD Specification Part E1 SDIO 3.0.
- High-performance cards - UHS-I (832 Mbps).
- Optional Multiple I/O functions and one Memory supported.
- Asyncrhonous interrupt to Host controller.
-
SD/eMMC Host Controller
- Supports selection between SD and eMMC
- Supports CRC7 and CRC16 generation and verification on Hardware
- Supports multiple block transfer
-
1.8V/3.3V Switchable GPIO With 5V I2C Open - Drain & Analog Cells in Samsung 11nm LPP
- Multi-voltage 1.8V / 3.3V switchable operation
- 4 selectable drive strengths (25-235 MHz @ 1.8V, 10pF
- Full-speed output enable
-
Secure Digital I/O offerings
- Secure Digital
- Physical Features
