IP Catalog > Interface IP > Memory Interface IP > SD/eMMC IP > SD/eMMC Controller IP

SD/eMMC Controller IP

Welcome to the ultimate SD Controller IP hub! Explore our vast directory of SD Controller IP
All offers in SD/eMMC Controller IP
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Login required.

Sign in

Search (57)
Compare 57 SD/eMMC Controller IP from 16 vendors (1 - 10)
  • eMMC 5.1 Host Controller
    • Compliant with eMMC Specification Version 5.0
    • Supports one of the following System/Host Interfaces: AHB, AXI or OCP
    Block Diagram -- eMMC 5.1 Host Controller
  • SD 3.0 / SDIO 3.0 / eMMC 5.0 Host Controller
    • Memory Card / Form Factors:
    • IP Details:
    Block Diagram -- SD 3.0 / SDIO 3.0 / eMMC 5.0 Host Controller
  • SD 4.0 UHS-II PHY TSMC 28nm HPM North-South
    • Compliant with SD Specifications Part 1 UHS-II Addendum v1
    • Supports data rate between 390 Mbps to 1.56 Gbps per lane
    • Supports peak interface speed of 3.12 Gbps in Half-duplex mode; 1.56 Gbps in Full-duplex mode
    • Sub-LVDS differential PHY signaling
    Block Diagram -- SD 4.0 UHS-II PHY TSMC 28nm HPM North-South
  • Block Diagram -- SD 4.1 SDIO 4.1 Host Controller IP
  • SD 3.0 / SDIO 3.0 Combo Device Controller
    • Meets SD Memory Card Physical Layer Specification version 3.0
    • Meets SDIO card specification ver 3.0
    • Host clock rate variable between 0 and 208 MHz
    • All SD bus modes supported including SPI, 1 and 4 bit SD.
    Block Diagram -- SD 3.0 / SDIO 3.0 Combo Device Controller
  • SDIO 3.0 Device Controller
    • Compliant with SD Specification Part E1 SDIO 3.0.
    • High-performance cards - UHS-I (832 Mbps).
    • Optional Multiple I/O functions and one Memory supported.
    • Asyncrhonous interrupt to Host controller.
    Block Diagram -- SDIO 3.0 Device Controller
  • SD/eMMC Host Controller
    • Supports selection between SD and eMMC
    • Supports CRC7 and CRC16 generation and verification on Hardware
    • Supports multiple block transfer
    Block Diagram -- SD/eMMC Host Controller
  • SD/SDIO/MMC Host Controller
    • Compliant with SD Host Controller Spec ver 2.0 and MultiMediaCard Spec ver 4.2/3.X
    • Supports SD 1bit and 4bit modes, as well as SPI mode
    • Supports MMCplus and MMCmobile specifications
    • Provides memory-mapped and i/o access to SD/MMC cards through a Wishbone slave adapter
    Block Diagram -- SD/SDIO/MMC Host Controller
  • Block Diagram -- Simulation VIP for eMMC
  • SDIO UHS II Verification IP
    • Supports SD specification UHS-II Adddendum version 2.00 compliant.
    • Supports Part E1 SDIO specification version 4.10.
    • Supports SD specification physical layer version 4.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft).
    • Supports bi-directional receiver/transmitter (2ch) supporting both Full Duplex and Half Duplex modes.
    Block Diagram -- SDIO UHS II Verification IP
×
Semiconductor IP