Memory Interface IP for SMIC
Welcome to the ultimate Memory Interface IP for SMIC hub! Explore our vast directory of Memory Interface IP for SMIC
All offers in
Memory Interface IP
for SMIC
Filter
Compare
29
Memory Interface IP
for SMIC
from 5 vendors
(1
-
10)
-
USB 3.0/ PCIe 3.0/ SATA 3.0 Combo PHY IP, Silicon Proven in SMIC 14SF+
- Support for SATA3(6.0Gbps) ,USB3.0(5Gbps) and PCIe3(8.0Gbps),
- Backward compatible with 1.5Gbps, 3.0bps for SATA
- Backward compatible with 2.5Gbps and 5Gbps for PCIe
- Full compatible with PIPE4 interface specification
-
PCIe 3.0/3.1/USB3.0/SATA3 Combo PHY
- Standard PHY interface enables multiple IP sources for PCI Express Logical Layer and provides a target interface for PCI Express PHY vendors.
- Supports 2.5Gb/s only or 2.5Gb/s,5.0Gb/s and 8.0Gb/s serial data transmission rate
- Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive PCI Express data
- Allows integration of high speed components into a single functional block as seen by the endpoint device designer.
-
SATA 6G PHY in SMIC (40nm, 28nm)
- Compliant with SATA/eSATA v3.3, AHCI v1.3 and SATA PIPE v4.3 specifications
- AMBA 2.0 AHB and AMBA 3 AXI subsystem interfaces
- AMBA 4 AXI and ACE-Lite bus interfaces
- Memory data protection and memory address parity protection
-
SATA 3.0 PHY
- OOB Generation and Detection
- Elasticity Buffer Optional
- Alternative Host or Device Power-on Sequence State Machine
- Speed Reduction Negotiation in Device Mode
-
eMMC/SDIO/SD
- Compliant with eMMC5.1 specifications, up to 200MHz
- Support HS400, HS200, High-Speed DDR, High-Speed SDR, and back compatible with legacy eMMC interface
- Support Enhanced Strobe in HS400
- Compliant with SD3.01/SDIO3.00 specifications, up to 208MHz
-
ONFI IO 2.2 /5.0
- ONFI5.1 modes & signaling, rates up to 4800Mbps
- x8/x16 data path interface extendable
- Supports 1.2 V/1.8V I/Os
- Multiple drive strengths adjustable
-
DDR3/3L/2 Combo PHY & Controller
- DDR3/3L/2 modes & signaling, rates from 20Mbps up to 1600Mbps (DDR3/3L) and 1066Mbps (DDR2), respectively
- x16/x32/x64 data path interface extendable
- 1.35V/1.5V/1.8V JEDEC IO standard, support 1.35V/1.5V/1.8V SSTL I/Os
- Multiple drive strengths adjustable
-
DDR4/3/2 Combo PHY & Controller
- DDR4/DDR3/DDR2 modes & signaling, rates from 100Mbps up to 2400Mbps
- x16/x32/x72 data path interface extendable
- 1.8V/1.5V SSTL & 1.2V POD JEDEC standard IO
- Multiple drive strengths adjustable
-
DDR5/4 Combo PHY & Controller
- DDR5 and DDR4 modes & signaling, rates from 20Mbps up to 5200Mbps (DDR5) and 3200Mbps (DDR4), respectively
- x16/x32/x64/x72/x80 data path interface extendable, support UDIMM, RDIMM and LRDIMM
- 1.1V/1.2V JEDEC IO standard, supporting 1.1V POD_11 and 1.2V POD_12 I/Os
- Support DDR5 dual channel mode, dual 32bit data +8bit ECC
-
DDR3/3L/2/LPDDR3/2 Combo PHY & Controller
- LPDDR3/2 modes & signaling, rates from 20Mbps up to 2133Mbps (DDR3/3L), 1066Mbps (DDR2/LPDDR2) and 1600Mbps (LPDDR3) respectively
- x16/x32/x64 data path interface extendable
- 1.2V/1.35V/1.5V/1.8V JEDEC IO standard, support 1.2V POD_12 and 1.35V/1.5V/1.8V SSTL I/Os
- Multiple drive strengths adjustable