IP Catalog > Interface IP > Memory Interface IP > SAS IP > SAS Controller IP

SAS Controller IP

Welcome to the ultimate SAS Controller IP hub! Explore our vast directory of SAS Controller IP
All offers in SAS Controller IP
Filter
Filter

Login required.

Sign in

Search (10)
Compare 10 SAS Controller IP from 4 vendors (1 - 10)
  • SAS Initiator, 12G, 4 Ports, 48 Gbps
    • The SAS Initiator Controller IP Core provides an interface to high-speed serial link replacement for the parallel SCSI attachment of mass storage devices.
    • Maximum supported bandwidth is 48 Gbps. The serial link employs multiple high-speed gigabit transceivers.
    Block Diagram -- SAS Initiator, 12G, 4 Ports, 48 Gbps
  • SAS 4 Port 12G Recorder
    • High Speed Data Recording
    • Up to 4 Ports
    • SAS 1.5, 3.0, 6.0 and 12.0 Gbps support
    • High Data Bandwidth
    • Hardware managed command sequencing
    Block Diagram -- SAS 4 Port 12G Recorder
  • Simulation VIP for SAS
    • Device type
    • Initiator, Target, and Expander
    • Operating Modes
    • Supports all SAS speeds: 1.5, 3, 6, 12, 24Gb/s
    Block Diagram -- Simulation VIP for SAS
  • Simulation VIP for OSPI NOR
    • Device Density
    • From 256Mb to 2Gb, with frequency up to 133MHz in SPI and 200MHz in OSPI mode
    • Operation Mode
    • Extended SPI mode, Octal SDR and DDR mode (Single I/O and Octal I/O)
    Block Diagram -- Simulation VIP for OSPI NOR
  • SAS Verification IP
    • Supports trained 1.5,3,6,12 and 22.5 Gbps speeds.
    • Supports untrained 1.5,3 and 6 Gbps speeds.
    • Supports Narrow ports and wide ports.
    • Supports Reset sequences
    Block Diagram -- SAS Verification IP
  • SAS Synthesizable Transactor
    • Supports trained 1.5,3,6,12 and 22.5 Gbps speeds.
    • Supports untrained 1.5,3 and 6 Gbps speeds.
    • Supports Narrow ports and wide ports.
    • Supports Reset sequences
    Block Diagram -- SAS Synthesizable Transactor
  • SAS INITIATOR IIP
    • Supports SPL 1.0/2.0/3.0/4.0/5.0 Specs
    • Fully synthesizable
    • Static synchronous design
    • Positive edge clocking and no internal tri-states
    Block Diagram -- SAS INITIATOR IIP
  • SAS 1-to-1 Speed Bridge with Sandbox
    • • Allows users to intercept data between the SAS Host and Device
    • • Fully compliant to SAS Gen-3 (12GHz) industry specifications.
    • • With correct FPGA, Bridge is capable of SAS Gen-3 (12GHz)
    • • Industry proven and compliant SAS interfaces
  • SAS Target Core
    • Fully compliant to the SAS 3.0Gb/s, 6.0 and 12.0Gb/s industry specifications
    • Processor specific interfaces for register access
    • Supports either SerDes, PIPE, or SAPIS interface
    • Synchronous design for easy integration
  • SAS Initiator Core
    • Fully compliant to the SAS 3.0, 6.0 and 12.0 Gb/s industry specifications
    • Processor specific interfaces for register access
    • Supports either SerDes, PIPE, or SAPIS interface
    • Synchronous design for easy integration
×
Semiconductor IP