Interconnect IP for Samsung
Welcome to the ultimate Interconnect IP for Samsung hub! Explore our vast directory of Interconnect IP for Samsung
All offers in
Interconnect IP
for Samsung
Filter
Compare
174
Interconnect IP
for Samsung
from 12 vendors
(1
-
10)
-
1-112Gbps Integrated Laser Driver and Optical SerDes
- Optical Optimization:
- Integrated laser driver
- RX front-end architected for optical signaling
- Non-linear DSP equalization that corrects for both static and dynamic nonlinearity components.
-
1-112Gbps Medium Reach (MR) and Very Short Reach (VSR) SerDes
- High speed performance
- Low power architecture
- Sub-sampling clock multiplier
-
MIPI C-PHY TRx / MIPI D-PHY TRx Combo PHY 5nm
- Low power consumption, small area
- Supports both overdrive (0.85V) and normal (0.75V) power
- Support for various lane configurations
-
MIPI C-PHY TRx / MIPI D-PHY TRx Combo PHY 4nm
- Samsung Foundry 4nm low power enhanced (LN04LPE) CMOS device technology
- 1.2V±5%, 0.75/0.85V±5% power supply
-
MIPI C-PHY TRx / MIPI D-PHY TRx Combo PHY 5nm
- Samsung Foundry 5nm low power enhanced (LN05LPE) CMOS device technology
- 1.8V±5%, 1.2V±5%, 0.75/0.85V±5% power supply
-
MIPI D-PHY Transmitter/Receiver for DSI/CSI-2 Samsung 28nm FD-SOI
- 4 Data Channel transmitter/receiver hard macro for DSI/CSI-2 of Samsung 28nm FD-SOI process
-
MIPI DPHY-RX
-
Data rate per lane: High-Speed mode 80M~2.5G bps, Low-Power mode 10Mbps
-
Silicon proven in GlobalFoundries 22FDX process
-
Compliant to the MIPI D-PHY spec v1.2
-
Lane type:1 clock + 4 data(D0 is bi-dir)
-
Support for DPHY Ultra Low Power State
-
-
MIPI DPHY-TX - GlobalFoundries 22FDX process
- Data rate per lane: High-Speed mode 80M~2.5G bps, Low-Power mode 10Mbps
- Silicon proven in GlobalFoundries 22FDX process
- Compliant to the MIPI D-PHY spec v1.2
- Support HiSPi-SLVS TX compatible mode
-
MIPI DPHY
- Silicon proven in 22, 28, 55, 110nm from Global Foundries, Samsung and SMIC
- Compliant to the MIPI D-PHY spec v1.1 (SEC28/SMIC55/SMIC110)
- Lane type:1 clock + 4 data, bi-directional
- Built-in self test function
-
USB3.0 PHY
- Silicon proven in 22, 28, Global Foundries and Samsung
- Spread Spectrum clock (SSC) and data scrambling to minimize EMI
- Supports 16-bit 250-MHz , and 32-bit 125M PIPE interface
- Multiple loopback and compliance test modes
