USB IP for TSMC
Welcome to the ultimate USB IP for TSMC hub! Explore our vast directory of USB IP for TSMC
All offers in
USB IP
for TSMC
Filter
Compare
50
USB IP
for TSMC
from 13 vendors
(1
-
10)
-
Complete USB Type-C Power Delivery PHY, RTL, and Software
- USB PD 3.1 compliant.
- 8 bit register interface for a low speed processor, or optional I2C interface.
- Integrated Chapter 6 protocol reduces required MPU response time to 10mS.
-
USB 2.0 Host Controller
- Fully compliant with USB Specification rev 2.0.
- Host Controller supports high (480 Mbps), full (12 Mbps) and low (1.5 Mbps) speed operation
- USB host controller supports Control, Bulk, Isochronous and Interrupt transactions
- VCI interface to external host processor
-
USB 2.0 Device Controller
- Full Compliance with the USB 2.0 specification.
- Control Endpoint 0 - Fixed size of 64-bytes.
-
A 130nm Wirebond IO library with 3.3V GPIO, LVDS TX & RX, 3.3V I2C open-drain, analog cell and OTP program cell
- GPIO:
- I2C / SMBUS Open-Drain I/O:
- LVDS
- ANALOG
-
A 65nm Wirebond IO library with 1-3.3V GPIO, 3.3V pulse-width modulation cell, I2C & SVID open-drain, 3.3V & 5V analog and OTP program cell
- GPIO:
- I2C / SVID Open-Drain I/O:
- ANALOG
- OTP Programming Cell
-
USB 3.0 PHY
- Standard PHY interface (PIPE) enables multiple IP sources for USB 3.0 Link Layer
- Supports 5.0 GT=s serial data transmission rate
- Supports 16- or 32-bit parallel interface
- Supports PCLK as PHY output
-
USB 3.0/ PCIe 2.0/ SATA 3.0 Combo PHY IP, Silicon Proven in TSMC 22ULP
- Compatible with PCIe/USB3/SATA base Specification
- Fully compatible with PIPE3.1 interface specification
- Data rate configurable to 1.5G/2.5G/3G/5G/6G for different application
- Support 16-bit or 32-bit parallel interface when encode/decode enabled
-
USB-C 3.1 DP/TX PHY ebdaux in TSMC (N5, N3E)
- Lowest risk: Based on proven USB 3.0 controller shipped in 100s of millions of units
- Lowest power: Extend battery life in mobile devices (USB power saving modes, Uniform Power Format, hibernation option with dual power rails)
- Configurable data buffering options to optimize performance vs area
- Supports all USB speed modes
-
eUSB 2.0 PHY in TSMC (N5, N4P, N3E, N3P)
- Compliant with eUSB2 specification rev 1.1
- Can be used in USB Host, Device, and Dual Role applications
- eUSB2 PHY and eUSB2 repeater supports USB 2.0 480Mbps (High Speed), 12Mbps (Full Speed) and 1.5Mbps (Low Speed) data rates
- eUSB2 PHY designed for the most advanced process nodes that does not support 3.3V signaling and 5V tolerance