Memory Interface IP for GLOBALFOUNDRIES

Compare 20 Memory Interface IP for GLOBALFOUNDRIES from 3 vendors (1 - 10)

Filter:

12nm

DDR PHY
- DDR5/4/3 training with write-leveling and data-eye training
- Optional clock gating available for low-power control
- Internal and external datapath loop-back modes
- I/O pads with impedance calibration logic and data retention capability
- Programmable per-bit (PVT compensated) deskew on read and write datapaths
- RX and TX equalization for heavily loaded systems
SD/eMMC - GlobalFoundries 12LP, North/South Poly Orientation
- Compliant with eMMC 5.1 HS400, SD 6.0 SDR104, DDR50, JESD8-7a (1.2V/1.8V) and JESD8c.01 (3.3V)
- Fully integrated hard macro with high speed IOs and DLL/delay lines
- Fine resolution DLL/delay lines for HS400 strobe and HS200/SDR104 auto-tuning
- Easy to integrate with the highly optimized Synopsys SD/eMMC Host Controller IP, providing a complete low risk solution
LPDDR5/4/4X PHY - GF 12LP+ for Automotive ASIL B Random, AEC-Q100 Grade 1
- Supports JEDEC standard LPDDR5X, LPDDR5, LPDDR4 and LPDDR4X SDRAMs
- Support for data rates up to 6400 Mbps
- Designed for rapid integration with Synopsys’ LPDDR5/4/4X controller for a complete DDR interface solution
- DFI 5.0 controller interface
LPDDR5/4/4X PHY - GF 12LP+
- Supports JEDEC standard LPDDR5X, LPDDR5, LPDDR4 and LPDDR4X SDRAMs
- Support for data rates up to 6400 Mbps
- Designed for rapid integration with Synopsys’ LPDDR5/4/4X controller for a complete DDR interface solution
- DFI 5.0 controller interface
DDR5/4 PHY - GF 12LP+
- Supports JEDEC standard DDR5 and DDR4 SDRAMs
- High-performance DDR PHY supporting data rates up to 8400 Mbps
- PHY independent, firmware-based training using an embedded calibration processor
- Supports up to 4 trained states/ frequencies with <3μs switching time
SD/eMMC in GF (12nm)
- Compliant with eMMC5.1 and SD 6.0
- Supports 1.2/1.8V and 3.3V bus voltages and all the operating modes for SD 6.0 and eMMC5.1
- Supports 1.8V signaling for SD 6.0 host–low voltage signaling (LVS)
- Includes high speed IOs and DLL/delay lines to guarantee alignment between the application processor and memory device
LPDDR5/4/4X PHY in GF (12nm)
- Low latency, small area, low power
- Compatible with JEDEC standard LPDDR5 SDRAMs up to 6400 Mbps
- Compatible with JEDEC standard LPDDR4 and LPDDR4X SDRAMs up to 4267 Mbps
- DFI 5.0 compliant interface to the memory controller
LPDDR4X multiPHY Plus in GF (12nm)
- Low latency, small area, low power
- Compatible with JEDEC standard LPDDR4 SDRAMs up to 4,267 Mbps
- Maximum data rate is process technology dependent
- Compatible with JEDEC standard DDR4 SDRAMs up to 3,200 Mbps
DDR5/4 PHY in GF (12nm)
- Low latency, small area, low power
- Compatible with JEDEC standard DDR5 SDRAMs up to 8400 Mbps
- Compatible with JEDEC standard DDR4 SDRAMs up to 3200 Mbps
- DFI 5.0 compliant interface to the memory controller
DDR4 Multi-modal PHY - GLOBALFOUNDRIES 12nm
- PLL-based clocking with internal clock alignment to the parallel clock on the memory controller interface
- Autonomous initialization
- Support for x72 bit channel
- Support for multiple DRAM widths (x4, x8, x16, x32)