IP Catalog > Foundries > GLOBALFOUNDRIES > Interface IP > Interconnect IP > USB IP > USB 3.1 IP

USB 3.1 IP for GLOBALFOUNDRIES

Welcome to the ultimate USB 3.1 IP for GLOBALFOUNDRIES hub! Explore our vast directory of USB 3.1 IP for GLOBALFOUNDRIES
All offers in USB 3.1 IP for GLOBALFOUNDRIES
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Search (5)
Compare 5 USB 3.1 IP for GLOBALFOUNDRIES from 2 vendors (1 - 5)
  • USB 3.1 Cable Marker IP
    • USB PD 3.1 compliant.
    • Single chip solution – just two external capacitors.
    • 4 pin package.
    • Less than 1mm2 area in 180nm.
    • PROM programmed through vendor message protocol.
    • Based on Obsidian’s mature PD technology.
    • Integrated PROM enables customized response to a wide range of vendor requirements.
    • Active Ra pulls down only requires 10uA at 5V., but is <1K below 2V.
    • Power <5mW. Enabled by CC data activity. I.e. very low duty cycle.
    • Programming can be done after assembly into the cable. Fuse lock function.
    • Supports low cost, 4 layer PCB assembly.
    Block Diagram -- USB 3.1 Cable Marker IP
  • Complete USB Type-C Power Delivery IP
    • Mixed signal Analog Front End Macros for 65n, 130n, 150nm, and 180n technologies.
    • RTL code from AFE to I2C compatible register set.
    • Stand alone C code for Protocol, Device Policy Manager, and System Policy Manager.
    • IP demonstration & development board, with compliance reports. 
    • Full chip integration of USB Type-C, and associated software.
    Block Diagram -- Complete USB Type-C Power Delivery IP
  • USB 3.1 PHY (10G/5G) - GF 22FD-SOI x1, North/South Poly Orientation
    • Part of a complete IP solution including xHCI host and device controllers, PHYs, verification IP, 1 IP Prototyping Kits and IP software development kits
    • Designed for advanced 1.8V CMOS planar bulk and FinFET process nodes
    • USB-C 3.1 PHY IP supports USB Type-C specification
    • Supports the SuperSpeedPlus (10 Gbps) and SuperSpeed (5 Gbps) speed modes
    Block Diagram -- USB 3.1 PHY (10G/5G) - GF 22FD-SOI x1, North/South Poly Orientation
  • USB-C 3.1/DP TX PHY in GF (22nm)
    • Lowest risk: Based on proven USB 3.0 controller shipped in 100s of millions of units
    • Lowest power: Extend battery life in mobile devices (USB power saving modes, Uniform Power Format, hibernation option with dual power rails)
    • Configurable data buffering options to optimize performance vs area
    • Supports all USB speed modes
  • USB 3.1 PHY (10G/5G) in GF (22nm)
    • Lowest risk: Based on proven USB 3.0 controller shipped in 100s of millions of units
    • Lowest power: Extend battery life in mobile devices (USB power saving modes, Uniform Power Format, hibernation option with dual power rails)
    • Configurable data buffering options to optimize performance vs area
    • Supports all USB speed modes
×
Semiconductor IP