Serdes IP for SMIC
Welcome to the ultimate Serdes IP for SMIC hub! Explore our vast directory of Serdes IP for SMIC
All offers in
Serdes IP
for SMIC
Filter
Compare
27
Serdes IP
for SMIC
from 7 vendors
(1
-
10)
-
10G Combo Serdes for USB/PCIe/Ethernet, SMIC 14FF, N/S orientation
- Supports 1.25G to 10.3125Gbps data rates and compact die area
- Supports up to 25dB channel loss@ 5.15625GHz
- Supports RX loss-of-signal detection
- Supports X1, X2 and X4 lanes
-
PCIe 2.0 Serdes PHY IP, Silicon Proven in SMIC 28HKMG
- Compatible with PCIe base Specification
- Full compatible with PIPE4.2 interface specification
- Independent channel power down control
- Implemented Receiver equalization Adaptive-CTLE to compensate insertion loss
-
Low Power Multi-Rate SerDes
- Data rates of <200Mb/s to >8Gb/s
- Compatible with SGMII, SATA, FibreChannel, JESD 204, V-by-One
-
1.25 Gbps SGMII SerDes
- Complies with Cisco Serial-GMII Specification revision 1.8
- 1.25Gbps (625MHz) operation
- LVDS I/O
- Jitter performance exceeds standard specification
-
3.25 Gigabit SerDes
- 1.0 to 3.25 Gbps operation per channel
- 1.2V power supply, CMOS design
- Low power dissipation
- Minimal external components
-
1.25 Gbps EPON SerDes IP
- IEEE 802.3ah compliant
- 1.25Gbps operation
- Jitter performance exceeds standard specification
- 1.2V power supply, CMOS design
-
4.25 Gbps Quad Multistandard SerDes
- 1.0 to 4.25 Gbps operation per channel
- 1.2V/2.5V power supply, CMOS design
- Low power dissipation (80mW /channel at 3.2 Gbps)
- Minimal external components
-
8G Multi-SerDes For PCIe3.0/USB3.0 PHY
- Reference Clock:
- Internal PLL:
- Data Transmit:
- Data Receive:
-
5G Multi-SerDes For PCIe2.0/USB3.0 PHY
- Reference Clock:
- Internal PLL:
- Data Transmit:
- Data Receive:
-
32G Multi-SerDes For PCIe5.0/USB3.x PHY
- Reference Clock:
- Internal PLL:
- Data Transmit:
- Data Receive: