SD/eMMC Controller IP
All offers in
SD/eMMC Controller IP
Filter
Compare
57
SD/eMMC Controller IP
from 17 vendors
(1
-
10)
-
SD Card Controller - Verifies SD card interface functionality, ensuring reliable data transfer and compliance with specifications
- The SD Card Controller Verification IP (VIP) is a tool designed to ensure the proper functionality and performance of SD card memory interfaces in SoCs. It validates key operations like read/write cycles, error handling, and power management across multiple SD card versions.
- This VIP is widely applicable in various fields, from SoC design validation to mobile devices and embedded systems. It guarantees reliable data transfer and smooth integration with SD card interfaces in industries such as automotive, consumer electronics, IoT, and more
-
Simulation VIP for eMMC
- High speed modes
- 200 MB/s Read and Write operation. HS400 Dual Data Rate Read and Write interface
- General eMMC Functionality
- 48-bit input command format and R1, R1b, R2 response formats
-
SDIO UHS II Verification IP
- Supports SD specification UHS-II Adddendum version 2.00 compliant.
- Supports Part E1 SDIO specification version 4.10.
- Supports SD specification physical layer version 4.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft).
- Supports bi-directional receiver/transmitter (2ch) supporting both Full Duplex and Half Duplex modes.
-
SDIO 8.0 Verification IP
- SDIO Specification 1.0/2.0/3.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft) compliant.
- Supports SDIO, SD Memory, SD Combo card and Multi-media cards.
- Easily configurable to work as SDIO aware or non-SDIO aware Host controller.
- Card detection on DAT [3] line in SD mode and CS line in SPI mode.
-
SD Express Verification IP
- Supports SD specification version 7.0, 7.10 and 8.0(Draft) compliant
- SD Express card supports NVMe protocol (revision 1.3, 1.3a, 1.3b, 1.3c, 1.3d and 1.4) over PCIe Interface
- Supports PCI-Express (PCIe) dual simplex point to point serial connection
- Bus Speed Mode - using PCIe Differential Interface lines
-
eMMC Verification IP
- Supports eMMC standard JESD84-A441, JESD84-B45, JESD84-B50, JESD84-B51 and JESD84-B51A specification.
- Supports stream transfer operations.
- Supports three different data width bus modes
- 1-bit(default)
-
SDIO 8.0 Synthesizable Transactor
- SDIO Specification 1.0/2.0/3.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft) compliant.
- Supports SDIO, SD Memory, SD Combo card and Multi-media cards.
- Easily configurable to work as SDIO aware or non-SDIO aware Host controller.
- Card detection on DAT [3] line in SD mode and CS line in SPI mode.
-
eMMC Synthesizable Transactor
- Supports eMMC standard JESD84-A441, JESD84-B45, JESD84-B50, JESD84-B51 and JESD84-B51A specification.
- Supports stream transfer operations.
- Supports three different data width bus modes
- 1-bit(default)
-
SDIO Host Controller IIP
- Compliant with SD Host Controller Specification version 4.0
- Compliant with Part E1 SDIO specification 4.10
- Supports SDMA, ADMA2 and ADMA3 modes
- Supports 1-bit, 4-bit bus mode and SPI Bus mode
-
SDIO Device Controller IIP
- Compliant with Part 1 Physical Layer Specification Version 3.01 and earlier versions
- Compliant with Part E1 SD Specification version 3.00 and earlier versions
- Supports all commands/response types
- Supports 1-bit, 4-bit ,8 bit SD bus mode and SPI Bus mode
